18
Suitable for PBT¹ screw cap with aperture. Heat resistance: 130 °C (vapour) and 200 °C (dry heat). Silicone is peroxide-cured.
SILICONE SEAL (Septa) VMQ¹, for piercing
Typical applications: injection or removal of media.
for DIN thread GL
d mm
Thickness mm
d
Cat. No.
Pack / Quantity
29 246 0503
14
12
2
100
29 246 0606
18
16
2
100
29 246 0906
25
22
2
100
29 246 0803
32
29
2
100
29 246 1002
45
42
3
100
1 F or chemical and thermal resistance, see page 27.
A 121 °C
Tmax. 200 °C
Flexible modular system. Four different hose diameters (1.6 mm; 3.0 mm; 3.2 mm and 6.0 mm) can be connected. Sterile pressure equalization is possible through use of membrane filter. Unused ports can be provided with a blind cap.
CONNECTION SYSTEM screw cap GL 45 with two or three ports PP¹ and PTFE¹
Typical applications: safe transfer of liquid media within a closed and sterile system (evaporation is reduced).
Best.-Nr. / Cat. No. 1129751
1129750
DIN thread GL
Cat. No.
Description
Pack / Quantity
1137799
11 297 50 Screw cap GL 45, PP¹, 2 ports GL 14 11 297 51 Screw cap GL 45, PP¹, 3 ports GL 14
45 45
2 2
Screw cap GL 14 PP¹, for hose connection Insert for screw cap GL 14, 1.6 mm (1/16 inch) ID Insert for screw cap GL 14, 3.0 mm (~1/8 inch) ID Insert for screw cap GL 14, 3.2 mm (1/8 inch) ID Insert for screw cap GL 14, 6.0 mm (~1/4 inch) ID Screw cap, PBT¹, with PTFE¹ coated seal, red, GL 14 Set for pressure compensation 2- and 3-port screw cap (incl. 0.2 μm membrane filter), GL 14 Spare membrane filter for pressure compensation, 0.2 μm
11 298 14
14
2
11 298 15
1
1129814
1156292
1129815 1129816 1129817 1129818
11 298 16
1
11 298 17
1
11 298 18
1
11 562 92
14
2
11 377 99
1
11 298 19
2
1 F or chemical and thermal resistance, see page 27.
Schematic diagram of GL 45 connection system
Screw cap GL 14 (PP) Silicone sealing ring on insert PTFE insert / tubing connector Tubing (not supplied) Port (PP) O-ring seal
Powered by FlippingBook