01 LABORATORY GLASS BOTTLES AND ACCESSORIES
DURAN® GL 45 Screw Cap with two hose connections
GL 45 cap connection system for the easy connection of flexible tubing to the DURAN® GL 45 bottles. The two polyproplylene connectors have angled top and straight underside connectors. Grey polypropylene cap center rotates freely, allowing the bottle to be unscrewed without the need to disconnect the tubing. The cap is ideal for use with soft elastic tubing that has an inner diameter of 6 – 9mm silicone tubing. An optional venting connector is available with, or without a syringe filter. Highly versatile as the screw cap is based on the standard GL 45 thread. Temperature resistant up to + 140°C. Fully autoclavable and washer-proof.
Typical applications: Possible biotech applications include the transfer of sterile media from one container to another using a peristaltic pump.
Cat. No.
Description
DIN Thread (GL)
Pack Unit
293102807 DURAN® Screw Cap GL 45 with 2 hose connections EDPM Gasket
45
2
1129825
Syringe Filter (0.2 µm) with connector, non-sterile 0.2 µm filter and female Luer Slip to 5.8mm male connector, with o-ring seal Syringe Filter Connector only (without syringe filter), female Luer Slip to 5.8mm male connector, with o-ring seal 40mm ring gasket seal for GL 45 mulifunction caps. Circular EPDM Seals 1.5mm thick with a 40mm outer and 29mm inner diameter.
2
1129829
2
1152752
5
Screw cap GL 45 with 2 hose connections (293102807) a Female Luer slip b Syringe Filter Connector (1129829) c 5.8mm connector with O-ring seal d Connector suitable for tubing with 6 – 9mm inner diameter e 5.8mm inner diameter f Connectors suitable for tubing with 6 – 9mm inner diameter g Syringe Filter with connector (1129825)
27
Powered by FlippingBook