ADAPTERS
5
Distillation
105° Bent Distillation Adapter with Surrounding Jacket Distillation 105° bent adapter with surrounding jacket. Used for highly volatile condensates.
75° Distillation Bent Adapters Distillation 75° bent adapters. Ideal for use as a stillhead adapter.
• • •
With Standard Taper inner joints at each end
Both joints are of the same size
• •
Water jacket completely surrounds adapter Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height (mm) x Overall Width (mm)
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Standard Taper Joints
Part Number
Case Qty
Part Number
Case Qty
272900-0000 272900-1922 158000-2440 158000-2942
14/20 19/22 24/40 29/42
50 x 55 50 x 55
1 1 1 1
159500-2440
24/40
210 x 145
1
130 x 140 130 x 140
105° Bent Distillation Adapters with Vacuum Take-off and Outer Hose Connection • Barbed hose connection • Standard Taper inner joint with drip tip at the bottom and Standard Taper outer joint at the top
105° Bent Distillation Adapters Bent 105° distillation adapters. •
• •
Joints are the same size
Standard Taper inner joint at the bottom and Standard Taper outer joint at the top
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Joints are the same size
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Fits Tubing ID (inches)
Part Number
Case Qty
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
205600-1420 205600-1922 205600-2440
14/20 19/22 24/40
1/4 1/4 3/8
1 1 1
Part Number
Case Qty
157500-2440 157500-2942
24/40 29/42
140 x 110 150 x 115
1 1
105° Bent Distillation Adapters with Vacuum Take-off and Inner Hose Connection • Barbed hose connection • Standard Taper inner joint with drip tip at the bottom and Standard Taper outer joint at the top
105° Bent Distillation Adapters with Drip Tip • Standard Taper inner drip joint at the bottom and Standard Taper outer joint at the top • Joints are the same size • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Joints are the same size
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Fits Tubing ID (inches)
Part Number
Case Qty
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Part Number
Case Qty
276400-0000 276410-0000 205500-2440 205500-2942
14/20 19/22 24/40 29/42
1/4 1/4 3/8 3/8
1 1 1 1
273200-0000 273200-1922
14/20 19/22
70 x 55 70 x 55
1 1
Long Stem 105 degree Distillation Bent with Vacuum Take-off • Lower tube is extended to 200 mm and may be shortened • Barbed hose connection fits 3/8” ID flexible tubing • Inner Standard Taper joint at the bottom and Standard Taper outer joint at the top • Joints are the same size • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
105° Distillation Bent Adapters with Tapered Drip Tube • Standard Taper outer joint at top • Tapered drip tube extends into open receivers • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Part Number
Case Qty
Standard Taper Joints
Fits Tubing ID (inches)
Part Number
Case Qty
273100-0000 157000-2440
14/20 24/40
65 x 65
1 1
206000-2440
24/40
3/8
1
115 x 115
Powered by FlippingBook