8 ADAPTERS
Distillation
Connecting Distillation Adapter with Bevel Seal Used in distillation assemblies where adjustable immersion depth of the thermometer is desired.
Foam-Type Distillation Trap Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser.
• •
Useful with rotary evaporators
•
Threaded top BEVEL-SEAL™ connection for plain stem thermometers Vacuum-tight seal is achieved with the open top compression cap and FKM o-ring BEVEL-SEAL™ cap 410119-1307 is suitable for use to 200 °C Thread size is modified GPI 13-425 and FKM o-ring is size 010 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I1 and ASTM E438, Type I, Class A requirements
517000 features a more extensive baffle system than other traps Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
•
•
Standard Taper Joints (Outer)
Standard Taper Joints (Inner)
Part Number
Case Qty
•
275095-0000 275095-2414 197500-2440 517000-2440
14/20 24/40 24/40 24/40
14/20 14/20 24/40 24/40
1 1 1 1
Thermometer Immersion Depth (mm)
Standard Taper Joints
Part Number
Case Qty
Transfer Distillation Adapter Used to transfer fluids between two flasks or as a one-piece distillation unit.
274960-0000 274960-1922 167100-2440
14/20 19/22 24/40
25 25 75
1 1 1
•
A variety of flasks or adapters may be connected to this unit to use at reduced pressure or under an inert atmosphere
• •
All joints are the same size
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Connecting Distillation Adapter with Thermometer Joint Used in distillation assemblies.
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Part Number
Case Qty
•
Outer Standard Taper top joint accommodates a thermometer Inner Standard Taper joints are at a 75° angle Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
211410-2440
24/40
155 x 270
1
Three Way Micro Distributor Adapter for Distillation Rotating three-way distributor.
Standard Taper Joints
Thermometer Standard Taper Joint
Part Number
Case Qty
274900-0000 274900-1922 167000-2440
14/20 19/22 24/40
10/18 10/18 10/30
1 1 1
•
Precise alignment allows distillate to drip directly into the receiver with no wetted surfaces or holdup
• • •
Receiver arms are 120° apart All joints are 14/20 Standard Taper
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 251175-0000
Standard Taper Joints
Case Qty
Jacketed Connecting Distillation Adapter Vacuum-jacketed, useful as a distilling head to connect a condenser with the top of a distillation column.
14/20
1
Thermometer Centering Device Designed for 6.5 mm OD manual thermometer or 1/4” temperature sensor probe as used on standard Automated Distillation Apparatus with Kimble 26015-125 flasks.
•
The Standard Taper 10/30 top outer joint is for use with 75 mm immersion thermometers Inner joints are at a 75° angle to one another Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
• •
Fits glassware designed for rubber stopper size 2 PTFE body with FKM o-ring seal assures proper centering of sensor probe in flask neck
• •
Cap material is yellow polypropylene
Standard Taper Joints
Thermometer Standard Taper Joint
Part Number
Case Qty
Ref: ASTM Method D86
Part Number
Body OD (mm)
Case Qty
167010-2942
29/42
10/30
1
26015C-125
6.5
1
Powered by FlippingBook