ADAPTERS
11
Inlet
Syringe Needle Adapters Provides access to flasks and other containers when pierced by a syringe needle.
Bleed Type Inlet Adapters with Dual Hose Connection and Standard Taper Joint Designed with two side hose connectors for venting or introducing gas/vacuum into a system.
•
When used in conjunction with standard syringes, liquid samples may be added or withdrawn from multiple neck flasks Supplied with one 774200-0022 Blind Hole Rubber Stopper fitted to the top Allows syringe needles to be used as a capillary bleed tubes or bubblers Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Hose connections fit 3/8” ID flexible tubing Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
Standard Taper Joints
Bottom Tube Length (mm)
•
Part Number
Case Qty
181000-2440
24/40
250
1
Standard Taper Joint (Bottom)
Part Number
Top
Case Qty
PTFE Bevel Seal Inlet Adapters Adjustable fitting designed to adapt to a variety of apparatus.
Blind Hole Rubber Stopper Blind Hole Rubber Stopper Blind Hole Rubber Stopper
275750-1420
14/20
1
275750-1922
19/22
1
•
A diameter variation of 1 to 2 mm can be accommodated since the inert o-ring is compressed by the open top cap to effect a vacuum-tight seal
197800-2440
24/40
1
• • • •
Body is PTFE
Bottom has a Standard Taper inner joint Design allows use with 675300 clamps
Supplied with FKM o-rings and with polypropylene cap suitable for use to 150 °C
Replacement Parts
Standard Taper Joints
Upper O-Ring Size, Lower O-Ring Size
Part Number
Case Qty
Part Number 774200-0022
Description
Case Qty
179800-2114 179800-2119 179800-2124 179800-2214 179800-2224 179800-2324
14/20 19/22 24/25 14/20 24/25 24/25
108, 13 108, 015 108, 018 109, 13 109, 018 111, 018
1 1 1 1 1 1
Silicone Blind Hole Stopper, 6 mm OD
12
Thermometer Inlet Adapters with Top Tubulature •
Standard Taper joint at the bottom and a tubulature for a thermometer at the top Includes arubber adapter with a ¼” hole in the top for use with plain stem thermometers, gas inlet tubes, etc. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Replacement Parts
•
Part Number
Description
Case Qty
Blue Glass-Filled Nylon 13-425 Open-Top Compression Cap, Hole Diameter 7 mm Polypropylene Replacement Caps for Connecting Adapters, 5/8” - 18, Fits OD 8 mm, Hole dia. 8.5 mm Polypropylene Replacement Caps for Connecting Adapters, 3/4 - 16, Fits OD 10 mm, Hole dia. 10.5 mm
•
410119-1307
12
179802-0022
6
Part Number Overall Height (mm)
Bottom Case Qty
275410-1420 275410-1922 199000-2440
50 57 95
Standard Taper 14/20 Standard Taper 19/22 Standard Taper 24/40
1 1 1
179802-0023
6
BEVEL-SEAL ™ Cross Section
Nylon Cap (410119)
Replacement Parts
O-ring
Part Number
Description
Case Qty
Rubber Adapters, 1/4” hole in the top for use with plain stem thermometers, gas inlet tubes, etc. Rubber Adapters, 1/4” hole in the top for use with plain stem thermometers, gas inlet tubes, etc.
773900-0000
12
Borosilicate Glass
44870R-99
6
Powered by FlippingBook