01 LABORATORY GLASS BOTTLES AND ACCESSORIES
DURAN® GL 45 Connection System
Materials used: PP and PTFE. Flexible modular system. Four different tubing diameters (1.6mm; 3.0mm; 3.2mm and 6.0mm) can be connected. Sterile pressure equalisation is possible through use of syringe filter. Unused ports can be sealed off with a red GL 14 screw cap.
screw cap GL 45, with two or three ports, GL 14 thread
Typical applications: Safe transfer of liquid media within a closed and sterile system (evaporation is reduced).
Cat. No.
Description
DIN Thread (GL)
Pack Unit
1129750 1129751 1129814 1129815 1129816 1129817 1129818 1129819
Screw cap GL 45, PP, 2 ports GL 14 Screw cap GL 45, PP, 3 ports GL 14
45 45 14
2 2 2 1 1 1 1 2
Screw cap GL 14 PP, for tubing connection Insert for screw cap GL 14, ID 1.6mm (1/16 inch) Insert for screw cap GL 14, ID 3.0mm (~1/8 inch) Insert for screw cap GL 14, ID 3.2mm (1/8 inch) Insert for screw cap GL 14, ID 6.0mm (~1/4 inch) Spare syringe filter for pressure compensation, 0.2 µm Screw cap, PBT, with PTFE coated seal, red, GL 14 Set for pressure compensation 2- and 3-port screw cap (incl. 0.2 µm syringe filter), GL 14
1156292 1137799
14 14
2 1
Cat. No. 1129751
1129750
1137799
1129814
1129815 1129816 1129817 1129818
1156292
Schematic diagram of GL 45 connection system a Screw cap GL 14 (PP )
b Silicone sealing ring on insert c PTFE insert / tubing connector d Tubing (not supplied) e Port (PP ) f O-ring seal
28
Powered by FlippingBook