ADAPTERS
13
Inlet
Pour or Transfer Adapters Used for precise pouring of liquids from reactors and joint flasks. Designed to eliminate droplet run-back.
Bevel Seal Thermometer Inlet Adapters For use with plain thermometers, pipets, syringes or other small items with an OD from 2 to 11 mm.
• •
Suitable for dry box and remote applications Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
With a hose connection for vacuum or the introduction of gases A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers, etc
•
•
Cap is suitable for use to 150 °C
Part Number 190000-2440 190000-2942
Standard Taper Joints
Case Qty
• To use as a septum port, just replace the o-ring with a PTFE-lined septum • Supplied with one FKM o-ring and one 410119 cap • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
24/40 29/42
1 1
Hose Inlet Adapters with Extended Lower Tube The hose connection on the side of the adapter provides a gas inlet for reactions.
Accommodation Range (mm), O-Ring Size
Standard Taper Joints
Part Number
Case Qty
746035-0510 746035-0814 179750-0514 179750-2114 179750-0814 179750-1119 179750-0524 179750-2124 179750-0824 179750-2129 179750-0829 179750-1129
14/10 14/10 14/20 14/20 14/20 19/22 24/40 24/40 24/40 29/42 29/42 29/42
2-5, 105 5-8, 108 2-5, 105
1 1 1 1 1 1 1 1 1 1 1 1
• •
Allows access to the bottom of flasks/tubes User may shorten the lower tube to fit the flask or apparatus Outer Standard Taper joint at the top and inner Standard Taper joint at the bottom are the same size Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
5.5-6.5, 10 5-8, 108 8-11, 111
•
2-5, 105
5.5-6.5, 10
•
5-8, 108
5.5-6.5, 010
5-8, 108 8-11, 111
Standard Taper Joints
Bottom Tube Length (mm)
Part Number
Case Qty
181500-2440
24/40
200
1
PTFE Bevel Seal Hose Inlet Adapters Designed to adapt a variety of tubes, condensers and filters in Standard Taper 14/20 and Standard Taper 24/25-24/40 glassware.
90° Hose Inlet Adapters Hose inlet 90° adapters. Ideal for use as a vent or for the introduction of pressure/vacuum.
•
Body is PTFE, o-rings are FKM, polypropylene compression cap is suitable for use to 150 °C, and side port is CTFE
•
Inner Standard Taper joint at the bottom and hose connection on the side Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
• Provides a combination inlet and vent tube on a single neck vessel • Converts plain stem type funnels for vacuum filtration • Extends gas inlet or gas dispersion tube into a flask to function as an impinger • Serves as a pressure relief vent when used with addition funnels • BEVEL-SEAL™ top for a thermometer • Side hose connection • Can be used to construct gas washing bottles • Diameter variations of 1 to 2 mm can be accommodated since the inert o-ring is compressed by the open-top polypropylene cap to create a vacuum-tight seal • The serrated side port can be used for a vacuum connection or for the introduction of gases • Side port o-ring size is 010 • Bottom has a Standard Taper inner joint
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
183000-2440 276000-0000 276010-0000 183000-2942
24/40 14/20 19/22 29/42
3/8 1/4 1/4 3/8
1 1 1 1
Dual Hose Inlet Adapters Adapter has two hose connections 180° apart to permit a flow of inert gas over the apparatus. Dual Hose Inlet Adapters.
Standard Taper Joints
Accommodation Range (mm), Bottom O-Ring Size
Part Number
Case Qty
179850-2114 179850-2124 179850-2214 179850-2224 179850-2324
14/20 24/25 14/20 24/25 24/25
5.5-6.5, 108 5.5-6.5, 108 6.5-8.5, 109 6.5-8.5, 109 8.5-10.5, 110
1 1 1 1 1
•
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
276020-0000 183010-2440
14/20 24/40
1/4 3/8
1 1
Powered by FlippingBook