ADAPTERS
14
Inlet
Hose Inlet Adapters with Vacuum Take-off Vertical adapter with vacuum take-off and drip tip.
Ball Hose Inlet Adapters Standard sizes fit existing apparatus using Spherical joints and permit attachment of a flexible hose without costly modification to the apparatus.
•
Outer Standard Taper joint at the top and inner Standard Taper joint at the bottom are the same size Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• • •
O-ring socket joint hose connector Supplied complete with a FKM o-ring
•
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
Fits Tubing ID (inches)
Part Number Spherical Joint Size
Case Qty
276750-0000 276760-0000 205000-2440 205000-2942
14/20 19/22 24/40 29/42
1/4 1/4 3/8 3/8
1 1 1 1
523860-0189 523860-2815
18/9
1/2 3/4
1 1
28/15
Socket Hose Inlet Adapters Standard sizes fit existing apparatus using Spherical joints and permit attachment of a flexible hose without costly modification to the apparatus.
Inner Joint Hose Inlet Adapters Ideal for use as a vent or for the introduction of pressure/vacuum.
• •
O-ring socket Spherical joint hose connector Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Inner Standard Taper joint at one end and vertical hose connection at the other Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Fits Tubing ID (inches)
Part Number Spherical Joint Size
Case Qty
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
523870-0125 523870-0189 523870-2815 523870-3525
12/5 18/9
1/4 1/2 3/4 3/4
1 1 1 1
276100-1420 276100-1922 182900-2440
14/20 19/22 24/40
1/4 1/4 3/8
1 1 1
28/15 35/25
1/4-28 Thread Hose Inlet Adapters •
Outer Joint Hose Inlet Adapters Ideal for use as a vent or for the introduction of pressure/vacuum.
Unique design adapts GPI threaded glass to a serrated PTFE hose connection or 1/4”-28 tubing connections
•
Standard Taper joint at one end and vertical hose connection at the other Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Internal Thread Size, Fits Hose ID (in)
Part Number
GPI Finish
Case Qty
•
747185-0013 747185-0020
13-425 20-400
1/4”-28, 1/4 1/4”-28, 1/4
1 1
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
Right Angle Flow Control Inlet Adapter with Glass Stopcock and Inner Standard Taper Joint For regulating the input of gases or liquids into reaction systems.
276110-1420 182910-2440
14/20 24/40
1/4 3/8
1 1
Hose Inlet Adapters with Fritted Disc •
Adapter has a 170-220 micron porosity disc between the hose connection and the inner joint Fritted disc prevents solids from being introduced into the system Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Stopcock has a glass plug
Inner Standard Taper joint on one end and a 90° hose connection on the opposite end Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
•
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
Standard Taper Joint
Fits Tubing ID (inches)
Part Number
Case Qty
275200-0000 275210-0000 185000-2440 185000-2942
14/20 19/22 24/40 29/42
1/4 1/4 3/8 3/8
1 1 1 1
276120-1420 276120-1922 182920-2440
14/20 19/22 24/40
1/4 1/4 3/8
1 1 1
Powered by FlippingBook