BOTTLES
26
Liner Technical Information / Phenolic Caps
Liner Technical Information
Liner Description
Application
Properties
• Good chemical resistance to mild acids, alkalis, alcohols, • • aqueous solutions, oils and solvents • Not recommended for hydrocarbons or bleaches
Pulp / vinyl polyvinyl film adhered to 0.035” pulpboard
General purpose
Tinfoil foil laminated to paper and bonded to 0.035” pulpboard
•
Good barrier
General purpose environmental sampling
• Good resistance to alcohols, hydrocarbons, ketones, oils • Not recommended for acids and alkalis
Solid PE 0.040” polyethylene
• • •
Good resistance to acids, alcohols, alkalis,
General purpose
•aqueous solutions, oils, solvents
Not recommended for hydrocarbon solvents
PTFE-faced LDPE foam 0.005” PTFE 0.050” LDPE foam
• • •
Excellent chemical resistance Compressible foam for sealability
General purpose
Poor for organic amines
Hermetic sealing for bio- logicals and other contents requiring sterilization Commonly used for liquids, seal is made across the top and the inside diameter of the container
• • •
Resistant to moisture vapor
White rubber 0.050” homogenous white rubber
Chemical barrier
Autoclavable
• • •
Excellent sealing ability Stress crack resistant Excellent torque retention
Taperseal (cone-shaped) LDPE
Please Note: All caps / liners should be tested to ensure leak and compatibility performance with contents.
Kimble® phenolic caps are... • Temperature tolerant • Widely compatibile chemically • Dimensionally stable
These caps are molded from phenolic, a thermoset plastic resin. We’ve selected phenolic as our material of choice for its high overal performance as a clousre. When used with Kimble® Type III glass storage containers, you get an unbeatable combination of performance and value.
Phenolic Caps for Bottles, Jars, and Jugs - with Tinfoil Liners • Excellent for environmental sampling and general purpose use •
Phenolic Caps for Bottles, Jars, and Jugs - with PTFE-Faced LDPE Foam Liners • Excellent solvent resistance and for general purpose use • Compressible foam offers excellent resealability • Not autoclavable • Specially formulated phenolic cap material • PTFE-faced LDPE foam liner
Good chemical resistance to mild acids, alkalis, alcohols, aqueous solutions, oils and solvents
• • •
Not autoclavable
Specially formulated phenolic cap material Liner constructed of foil laminated to paper and bonded to pulpboard
Part Number 75206G-20400 75206G-22400 75206G-24400 75206G-28400 75206G-33400 75206G-38400 75206G-43400 75206G-45400 75206G-48400 75206G-53400 75206G-58400 75206G-63400 75206G-70400 75206G-89400
GPI Finish
Case Qty
Part Number 75203G-20400 75203G-22400 75203G-24400 75203G-28400 75203G-33400 75203G-38400 75203G-43400 75203G-45400 75203G-48400 75203G-53400 75203G-58400 75203G-63400 75203G-70400 75203G-89400
GPI Finish
Case Qty
20-400 22-400 24-400 28-400 33-400 38-400 43-400 45-400 48-400 53-400 58-400 63-400 70-400 89-400
144 144 144 144 144 144 144 144 144 144 144 144 144 144
20-400 22-400 24-400 28-400 33-400 38-400 43-400 45-400 48-400 53-400 58-400 63-400 70-400 89-400
144 144 144 144 144 144 144 144 144 144 144 144 144 144
Powered by FlippingBook