BOTTLES
30
RAY-SORB® GL 45 Media Bottles / Storage
Storage/Media Bottles Only Ideal for general laboratory use including mixing, storing or transporting culture media, chemicals or solvents.
RAY-SORB® GL 45 Media Bottles Ideal for general laboratory use including mixing, storing or transporting culture media, chemicals or solvents.
• •
•
Screw thread opening, cap not supplied Manufactured from USP Type I molded glass
Enhanced graduations and marking spot made with chemically resistant white enamel paint
• • • •
30 mm ID opening
Linerless GL 45 screw thread cap
Autoclavable
Part Number 61100-125 61100-250 61100-500 61100-1000 61100A-1000
Capacity (mL)
GPI Finish
Case Qty
Replaceable clear (natural) drip-free polypropylene pour ring is included on each bottle Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements and then RAY-SORB® processed
125 250 500
33-430 33-430 33-430 33-430 38-430
48 48 24 12 12
•
1000 1000
Storage/Media Bottles with Attached Closures
Ideal for general laboratory use including mixing, storing or transporting culture media, chemicals or solvents.
• •
Graduated markings
All sizes are molded with a convenient 33 mm pour-out neck finish, while the 1000 mL is also available with a larger 38 mm pour-out opening Finger indents are molded into the side walls of 1000 mL bottles for safety 61110R and 61111R are assembled with phenolic white rubber-lined closures 61110T and 61111T are assembled with phenolic PTFE-faced white rubber-lined closures 61110P and 61111P are assembled with polypropylene closures welded to PTFE/silicone liners 61110P and 61111P closures are ideal for repeated autoclaving, and the PTFE/silicone liner eliminates possibility of glue contamination
•
Part Number 14399-100 14399-250 14399-500 14399-1000 14399-2000 14399-5000 14399-10000
Capacity (mL)
Height x OD (mm) Case Qty
100 250 500
100 x 56 138 x 70 176 x 86 225 x 101 260 x 136 330 x 181 410 x 227
1 1 1 1 1 1 1
•
•
1000 2000 5000
•
10000
•
• •
Large white marking spot
Manufactured from USP Type I molded glass
Replacement Parts
Part Number
Capacity (mL) x GPI Finish
Case Qty
Liner Material
Case Qty
Part Number
Description
PTFE/Silicone Welded to Closure PTFE/Silicone Welded to Closure PTFE/Silicone Welded to Closure PTFE/Silicone Welded to Closure PTFE/Silicone Welded to Closure
61110P-125
125 x 33-430
48
Blue Polypropylene GL-45 Solid Top Screw Thread Cap, Max. Temp. 140° C Clear Polypropylene GL-45 Bottle Pour Ring, Max. Temp. 140° C
14395C-45
10
61110P-250
250 x 33-430
48
14395P-45
10
61110P-500
500 x 33-430
24
61110P-1000 1000 x 38-430
12
61111P-1000 1000 x 33-430
12
61110R-125 61110R-250 61110R-500
125 x 33-430 250 x 33-430 500 x 33-430
White Rubber White Rubber White Rubber White Rubber White Rubber
48 48 24 12 12 48 48 24 12 12
GL 45 Pour Ring Designed for use with 14395 series bottles and 26720 series flasks.
61110R-1000 1000 x 38-430 61111R-1000 1000 x 33-430
61110T-125 61110T-250 61110T-500
125 x 33-430 250 x 33-430 500 x 33-430
PTFE-Faced White Rubber PTFE-Faced White Rubber PTFE-Faced White Rubber PTFE-Faced White Rubber PTFE-Faced White Rubber
•
Pour rings are made of clear drip-free polypropylene or red ETFE 14395E-452 high temperature ring is recommended for use with 14395H-452 high temperature cap
•
61110T-1000 1000 x 38-430 61111T-1000 1000 x 33-430
Part Number
Material
Case Qty
14395P-45 14395E-452
Polypropylene
10 10
ETFE
Powered by FlippingBook