01 LABORATORY GLASS BOTTLES AND ACCESSORIES
DURAN® Screw Cap with Temperature Probe Holder
The DURAN® temperature probe holder GL 45 consists of a stainless steel holder that is permanently fitted into a blue DURAN® polypropylene GL 45 cap. The holder will accept the 6.0mm metal temperature measuring probes that are commonly used in laboratory autoclaves and sterilizers. Many DURAN® customers use an autoclave to sterilise the liquid contents of DURAN® original GL 45 laboratory bottles. Autoclaves use a metal temperature measuring probe to ensure that the correct sterilisation temperature as been reached.
GL 45
h
Cat. No.
DIN Thread (GL)
d (OD) (mm)
h (mm)
h 1 (mm)
Pack Unit
299912801
45
54
21.3
25.7
1
h 1
DURAN® Screw Cap with Thermocouple Holder
The DURAN® Screw Cap GL 45 Thermocouple Holder consists of a holder fitted into a blue DURAN® polypropylene GL 45 cap that accepts up to three separate thermocouple wires used in autoclaves or sterilizers. A particular issue when using thermocouples is that their very thin connection wires have a tendency to curl, making it difficult to maintain the tip (where the temperature is measured) in the correct position within the bottle during the entire sterilizing cycle. To overcome this problem, the DURAN® Screw Cap GL 45 Thermocouple Holder has a hollow PTFE tube to keep the wires straight.
GL 45
h
Cat. No.
DIN Thread (GL)
d (OD) (mm)
h (mm)
h 1 (mm)
Pack Unit
299922802
45
54
21.3
248.7
1
h 1
d
DURAN® Screw Cap GL 45 for pH Sensor
Cat. No.
DIN Thread (GL)
d (OD) (mm)
h (mm)
Pack Unit
1171395
45
54
28
1
from PBT
h
d
30
Powered by FlippingBook