BOTTLES
34
Vacuum / Pressure / Solution
Vacuum or Pressure Bottle This laboratory bottle has been specially designed for use under vacuum and at pressures up to 1.5 bar (at a maximum of 140 °C).
HPLC Reservoir Adapters to Convert GL 45 to Solvent Bottle Designed to convert ULTRAWARE® GL-45 mobile phase caps to standard 4L solvent bottles.
• •
GL 45 screw thread
• • •
Autoclavable
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Manufactured from polybutylene terephthalate Allows direct access to HPLC instruments
Part Number 953907-0000
Case Qty
Operating Pressure (bar)
Part Number
Capacity (mL)
Case Qty
1
953900-0010
1000
1.5
1
GL 45 High Temperature Caps for HPLC Reservoirs Caps are for use with high temperature applications and will fit any reservoirs or bottles with GL 45 screw threads.
Solution Bottles With Color-Coded PTFE Flathead Stopper These KIMAX® bottles are designed for storage and dispensing of solutions.
• •
Autoclaving maximum temperature is 180 °C Chemically resistant to alcohols, ethers, hydrocarbons and dilute or strong acids Manufactured from polybutylene terepthalate
•
Bottle necks are Standard Taper ground to accept flathead color-coded PTFE stoppers Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
Max Temperature (ºC)
Part Number
Screw Thread
Case Qty
14395H-452 953909-0000
GL 45 GL 45
180 180
10
Standard Taper Stopper Size
1
Part Number
Capacity (mL)
Case Qty
15097-100 15097-250 15097-500 15097-1000 15097-2000
100 250 500
14 19 24 29 29
1 6 6 6 4
1000 2000
HPLC Reservoir Adapters to Convert GL 45 to Standard Taper 40/35 Designed to convert GL 45 threads to Standard Taper 40/35 inner joints.
• •
Autoclavable
Allows filter membrane support glassware with 40/35 outer joints to be used on ULTRA-WARE® HPLC reservoirs Highly chemically resistant PTFE remains non- brittle at sub-zero temperatures
•
Replacement Parts
Case Qty
Part Number
Description
Standard Taper Joints
Part Number
Screw Thread Case Qty
Size 24 solid blue flathead PTFE Bottle Stopper, 24mm Diameter at Large End, 30mm Length of Ground Zone, 13mm Height Above Standard Taper Grind Size 29 solid green flathead PTFE Bottle Stopper, 29.2mm Diameter at Large End, 35mm Length of Ground Zone, 13mm Height Above Standard Taper Grind Size 34 solid orange flathead, PTFE Bottle Stopper, 34.5mm Diameter at Large End, 40mm Length of Ground Zone, 15mm Height Above Standard Taper Grind Size 14 solid red flathead PTFE Bottle Stopper, 14.5mm Diameter at Large End, 20mm Length of Ground Zone, 10mm Height Above Standard Taper Grind Size 24 solid blue flathead PTFE Bottle Stopper, 24mm Diameter at Large End, 30mm Length of Ground Zone, 13mm Height Above Standard Taper Grind
953905-0000
40/35
GL 45
1
41941R-24
6
41941R-29
6
GL 45 PTFE Screw Thread Caps Designed to fit any reservoir or bottle with GL 45 screw threads.
41941R-34
6
• • • •
Provides the best possible seal
PTFE cap body is chemically inert and remains non-brittle at sub-zero temperatures
850540-0014
1
TFE/propylene o-ring, size 216 Polypropylene screw collar
850540-0024
1
Part Number 953908-0000
Case Qty
1
Powered by FlippingBook