BOTTLES
36
Heavy Duty Carboy / B.O.D. / Display
KimCote® Heavy Duty Carboy Designed for storage of solutions and ideal for media preparation.
300 mL B.O.D. Bottles Designed for sampling and incubation of aqueous samples. Determines the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action.
•
Autoclavable KimCote® safety coating reduces the hazards of shattered glass and leakage of toxic or corrosive chemicals With sloping shoulders of the carboy style Neck is tooled for a uniform fit with a #12 rubber stopper 5 gallon size is designed from Federal Specification DD-B-597
•
The design incorporates a flared mouth used to form a water seal which prevents the drawing of air into the bottle during incubation • The bottle’s shoulder radius has been improved to provide an interior shape which sweeps entrained air out of the stopper opening • Glass stopper design uses a conical extension to displace excess sample which further insures no air entrapment in the sample • For reference see Method 5210-B: 5-Day B.O.D. Test (Standard Methods for Examination of Water and Wastewater) • Manufactured from 33 expansion, expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
•
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Accessories include carboy clamp and silicone stopper assemblies
• 3-port platinum-cured stopper assembly and sanitary PVDF clamp to provide sterile fluid transfer with no extractables, as required in bio-tech and pharmaceutical applications • The stopper ports are designed to connect 1/8”, 1/4” (4-port stopper has two 1/4” tubes) and 3/8” silicone tubing • The silicone tubing provided is cut into 2’ lengths • Non-sterile • Autoclavable • These assemblies are specifically designed to fit all sizes of KIMAX® 14950 solution (carboy) bottles
Number Sequence
Part Number Height x OD (mm)
Case Qty
15070-00 15070-01 15070-25
165 x 69 165 x 69 165 x 69
Un-numbered
24 24 24
01 - 24 25 - 48
Part Number KC14950-25 KC14950-35 KC14950-500
Capacity (mL)
Height x OD (mm) Case Qty
9500
392 x 222 448 x 257 502 x 294
1 1 1
13200 19000
Replacement Parts
Part Number
Description
Case Qty
300 mL Un-numbered BOD Bot- tles without Stoppers
15070G-00
24
Accessories
Accessories
Part Number 14950C-12 14950S-321 14950S-2321
Description
Case Qty
Clamp
1 1 1
Part Number
Description
Case Qty
Stopper, 3 port Stopper, 4 port
Snap Caps for 300mL BOD Bottles
15070L-99
50
2000 mL B.O.D. Bottles Designed with increased volume for long term sampling and incubation of aqueous samples for biochemical oxygen demand (B.O.D) analysis.
Display Bottle Used to display materials, particularly at exhibits, museums and medical schools.
•
The design of the neck has a flared mouth to form a water seal which prevents the entrance of air For reference see Method 5210-C: Ultimate B.O.D. Test (22 nd Edition of Standard Methods for Examination of Water and Wastewater) Manufactured from 33 expansion, expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Finished with uniform walls
•
Heavy flared base which does not exceed the jar diameter Specially fitted corks are included and packed separately Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
•
Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
Part Number 332250-2000
Capacity (mL)
Height x OD (mm) Case Qty
2000
248 x 140
1
15107-2 15107-4 15107-8 15107-16
59
105 x 36 115 x 51 162 x 63 210 x 71
12 12 12 12
118 237 473
Powered by FlippingBook