BOTTLES
39
Gravity / Gasoline / Wash
Hubbard Specific Gravity Bottles KIMAX® bottle is used in the determination of specific gravity for a large variety of semisolid materials and emulsions.
Le Chatelier Class A Serialized Specific Gravity Bottles KIMAX® bottle used in the determination of the specific gravity of cement, sand and other fine materials (ASTM C188).
•
Short length stopper is conical on the underside and has a hole approximately 1.6 mm in diameter to allow air to escape Determines specific gravity for road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); water and brine (ASTM D1429); and insulating varnishes (ASTM D115) Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• • • •
Designed for a 64 gram sample Body holds approximately 250 mL Smaller neck bulb holds 17mL
•
Below the neck bulb, the neck is graduated from 0 to 1.0 mL and has two extra 0.1 mL lines both above 1.0 mL and below 0.0 mL, with a tolerance of ±0.05 mL • Above the neck bulb, the neck is graduated from 18 to 24 mL in 0.1 mL intervals, with a tolerance of ±0.05 mL. • All markings are durable white enamel • Supplied with serial number • Replacement stopper is 850100 • Designed from ASTM Specification E694 and complies with C188 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Standard Taper Joints
Part Number
Capacity (mL)
Case Qty
15110-24
24
24/12
12
Standard Taper Joint
Part Number
Capacity (mL)
Case Qty
Hubbard-Carmick Specific Gravity Bottles KIMAX® bottle is used in the determination of specific gravity for a large variety of semisolid materials and emulsions.
15115-24
24
13
2
•
Short length stopper is conical on the underside and has a hole approximately 1.6 mm in diameter to allow air to escape
• •
Conical shape offers greater stability
Wash Bottles KONTES/GUTH Unitized® Washbottles allow you to automatically pump a continuous, forceful jet of washing or rinsing liquid that may be instantly stopped as needed.
Determines specific gravity for road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); water and brine (ASTM D1429); and insulating varnishes (ASTM D115) Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
Easy one-handed operation (either hand), leaving the other hand free for other needs Crystal clear glass flask permits quick inspection of the contents KONTES/GUTH Unitized® Washbottles are recommended for use at ambient temperatures Features borosilicate glass flask and neoprene parts for improved solvent resistance
•
Standard Taper Joints
•
Part Number
Capacity (mL)
Case Qty
15113-25
25
24/12
12
•
Part Number
Case Qty
1011
1
Unsaturation Gasoline Bottle KIMAX® bottle used in the determination of unsaturated hydrocarbons in gasoline.
•
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements The body of the bottle (approximately 45 mL capacity) is a “reaction vessel” in which an accurately measured sample is pipetted into the bottle; excess reagent is then added. After the reaction is complete, more reagent is added to raise the “fat column” into the calibrated neck of the bottle, where results are read directly as a percentage of fat in the sample.
Height x Base OD (mm)
Part Number Neck Capacity (%)
Case Qty
15066-10
100 (10 mL)
164 x 37
12
Powered by FlippingBook