CENTRIFUGE TUBES
68
Pear-Shaped / Oil / California
Pear-Shaped Centrifuge Tubes with Red Scale Graduated tube is used for the determination of water and sediment in petroleum products.
8” Oil and Weathering (End Point Index) Centrifuge Tubes Oil and weather index 8-inch centrifuge tubes can be used in the determination of residues in Liquified Petroleum (LP) gases, ASTM Method D2158.
• • •
Top is tooled for a size 5 rubber stopper
Calibrated to contain
• • • •
KIMAX® tube used extensively in California
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Calibrated to contain
Different graduations than 45240
Scale and legend are durable white ceramic enamel Top is tooled to accept snap cap 28150R-6 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Part Number 412510-0000
Capacity (mL)
Stem Volume (mL) Case Qty
100
3
1
Part Number
Capacity (mL)
OD x Length (mm) Case Qty
45241-100
100
37 x 203
12
Pear-Shaped Centrifuge Tubes with White Scale KIMAX® tube used in the determination of bottom sediment and water in petroleum products.
6” Short Cone Oil Centrifuge Tubes KIMAX® tube designed for field use in testing petroleum.
• • •
Calibrated to contain Stem holds 1.5 mL
Scale and legend are durable white ceramic enamel Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Calibrated to contain
•
Scale and legend are durable white ceramic enamel 45243-200 is graduated in %. 100 mL equals 200% Top is tooled to accept snap cap 28150R-6 Referenced in API MPMS Chapter 10.4 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• • • •
Part Number
Capacity (mL)
OD x Length (mm) Case Qty
45244-100 45244-200
100
58 x 158 58 x 158
12
100 (200%)
6
Part Number
Capacity (mL)
OD x Length (mm) Case Qty
45243-100 45243-200
100 100
45 x 165 45 x 165
12
6
8” Oil Centrifuge Tubes KIMAX® 8-inch oil centrifuge tubes used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products (D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating oils (ASTM D91 and D128); and in testing for acidity of distillation residues or hydrocarbon liquids of gasoline or petroleum solvents (ASTM D1093).
California Centrifuge Tube with Red Stripe KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796.
• •
Calibrated to contain
•
Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to accept snap cap 28150R-6 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Scale and legend are durable white ceramic enamel Top is tooled to accept snap cap 28150R-6
•
• • •
Referenced in ASTM D4007
• •
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
OD x Length (mm) Case Qty
Part Number
Capacity (mL)
OD x Length (mm) Case Qty
45239-100
100
38 x 200
12
45240-100
100
37 x 203
12
Powered by FlippingBook