CHROMATOGRAPHY
93
ULTRA-WARE®
ULTRA-WARE® Plastic-Coated HPLC Reservoirs ULTRA-WARE® reservoirs have been specially designed for the preparation, storage and delivery of all liquid chromatography mobile phases. • Manufactured from the most chemically inert glass available to prevent the leaching of any extractables into the mobile phase solvents, then externally coated with a safety plastic with an added ultraviolet (UV) blocking agent • In case of an accident, the plastic safety coating helps retain glass fragments and allows a reasonable amount of time for the safe disposal of the liquid contents • Plastic coating also blocks virtually all UV light up to 385 nm, preventing photo-degradation of light-sensitive reagents • Recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents • Can also be used at internal pressures of up to 6 psig for helium sparging and blanketing of the mobile phase • Conical bottom reservoirs deliver virtually all of the mobile phase without dangerous reservoir tilting • All ULTRA-WARE® reservoirs are supplied with GL 45-4 screw thread • Plastic coating is PVC with a UV blocking agent • Patent No. Des. 292,824 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Safety System 3 Closures Safety System 3 is a unique Solvent Bottle Adapter that is made from PBT and converts ULTRAWARE® GL-45 mobile phase caps to standard 4L solvent bottles for direct connection to your HPLC pump. It is also available without the solvent bottle-to-GL-45 thread adapter.
•
Eliminates the safety hazards of aluminum foil- wrapped solvent containers ULTRA-WARE® Economy Three Hole Cap is manufactured from PTFE with a TFE/propylene o-ring and a polypropylene screw collar Three connecting threads on top of the cap use standard ¼”-28 flangeless fittings Two ports have 1/8” through-holes for connection to the inlet / sparge filter The third port has a 1/16” through-hole used as a vent port during sparging
•
•
•
•
I ncluded with your Safety System 3 is the unique Bottom-of-the-Bottle™ Inlet/ Sparge Filter.
Port for sparging line (optional use)
Port for solvent intake line
•
The filter combines the functions of an inlet filter with a sparger in a single, convenient device Sparging bubbles are prevented from entering the mobile phase stream while allowing the pump to draw all but a few milliliters of solvent from the reservoir or bottle All PEEK construction makes it ideal for virtually all mobile phases
Filter Article No. 953916-3002
•
Draws solvent from bottom of solvent bottle
Filters incoming sparging gas (optional use)
•
• Supplied with 2 μm porosity frits and connections for 1/8” OD tubing.
Flat Bottom without Graduations
Each Safety System 3 consists of the following:
Overall Height x Diameter (mm)
•
953913-5000 1 ea. Economy 3-Hole Cap, GL-45
Part Number
Capacity (mL)
Case Qty
• 953907-0000 1 ea. Solvent Bottle Adapter, GL-45 (included with 953930-0000 only) • 953916-3002 1 ea. Combination Inlet / Sparge Filter, 2 μm, PEEK™ • 420821-0018 2 ea. Flangeless Nut, ETFE, ¼”-28 x 1/8” • 420822-0018 2 ea. Flangeless Ferrule, ETFE, 1/8” (Optional) • 953913-0001 1 ea. Vent Port Plug, ETFE, ¼”-28 • 420823-0018 1 ea. Tubing, FEP PTFE, 1/8” OD x 1/16” ID x 10’
953902-0252 953902-0502 953902-1002 953902-2002 953902-5002 953902-1003 953902-2003
250 500
133 x 73 165 x 89 205 x 111 250 x 138 320 x 186 400 x 234 490 x 300
1 1 1 1 1 1 1
1000 2000 5000
10000 20000
Part Number 953930-0000 953930-0001
Case Qty
1 1
Replacement Parts
Part Number
Description
Case Qty
ETFE Flangeless Nut for 1/8” OD Tubing, 1/4”-28 Thread, Use with the 420822-Series Flangeless Ferrules ETFE Flangeless Ferrule for 1/8” OD Tubing, for Use with 420821 Series Male Nuts ETFE Nut Plug 1/4”-28, Used to Seal Ports with Flat Bottom 1/4”-28 Threads Economy Three-Hole Cap - includes PTFE body, GL45 open top screw collar, and a size 216 TFE/propylene o-ring Solvent Bottle Adapter, GL 45 to 4L Solvent Bottle, Made from PBT, Autoclavable 2 µm All PEEK Inlet/Sparge Filter, OD 1.1”, Length 0.8”, Fits Tubing OD 1/8”
953913-5000
1
953907-0000
1
Flat Bottom with Graduations
953916-3002
1
Overall Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
420821-0018
1
953932-0252 953932-0502 953932-1002 953932-2002 953932-5002 953932-1003 953932-2003
250 500
203 x 85 230 x 105 275 x 130 319 x 150 373 x 205 433 x 255 578 x 315
1 1 1 1 1 1 1
1000 2000 5000
420822-0018
1
953913-0001
1
10000 20000
420823-0018 1/8” OD x 0.063” ID x 10’ FEP / PTFE Tubing
1
Powered by FlippingBook