CHROMATOGRAPHY
96
ULTRA-WARE®
ULTRA-WARE® Solvent Pickup Adapters Designed to be used with the five valve, four valve and filtration caps to provide safe, in-line filtration that replaces the traditional pour-and-wait funnel filtration method.
Filtration Caps • ULTRA-WARE® •
Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing Upper screw clamp holds a solvent pickup adapter or funnel 40-60 micron porosity fritted glass filter support is removable
•
The unique Bevel-Seal™ makes a vacuum-tight o-ring connection to the PTFE tubing The HI-VAC® valve is easier to open under vacuum than the standard stopcock Closing the valve provides vacuum degassing after filtration Each unit is supplied with 3 feet (91 cm) of 1/4” OD FEP PTFE tubing 953906-6347 and 953906-6390 have FFKM o-rings and are THF-resistant
•
•
•
953906-0002 953906-0092
•
•
Supplied with a PTFE/propylene o-ring
•
Filter Diameter (mm)
Part Number
Screw Thread Case Qty
953906-0001 953906-6301
•
953915-0047
47
GL 45
1
410119-1508
• Valve o-ring size is 010 and sidearm o-ring size is 108 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Replacement Parts
Part Number 953914-0002
Description
Case Qty
47 mm Upper Screw Clamp
1
Part Number 953906-0047 953906-6347 953906-0090 953906-6390
Diameter (mm)
THF Resistance Case Qty
47 mm 40-60 micron Porosity Glass Support Frit
953914-0001
1
47 47 90 90
No
1 1 1 1
Yes
953981-0005 953981-0004 953915-0001 953914-0006
1/4” PFA Hose Barb
1 1 1
No
PTFE Drip Tip
Yes
GL 45 Lower Screw Cap Lower Cap Retainer Ring
1
Replacement Parts
Accessories
Part Number 953906-0002 953906-0092 953906-0001
Description
Case Qty
Part Number 953984-0090 953906-0090 953906-0047
Description
Case Qty
47 mm Pickup Adapter Body 90 mm Pickup Adapter Body Standard Valve Plug Assembly Blue Glass-Filled Nylon 15-415 Open-Top Compression Cap, Hole Diameter 8.5 mm
1 1 1
ULTRA-WARE® Conversion Base for Caps
1 1 1
90 mm Standard Pickup Adapter 47 mm Standard Pickup Adapter
410119-1508
12
ULTRA-WARE® Conversion Base Converts the five valve, four valve and filtration caps to use 90 mm filter membranes, providing up to four times faster filtration.
953914-0092
ULTRA-WARE® Solvent Inlet/Sparge Filters
Part Number
Description
Case Qty
953914-0091
2 µm All PEEK Inlet/Sparge Filter, OD 1.1”, Length 0.8”, Fits Tubing OD 1/8”; Ideal for Virtually All Mobile Phases
953916-3002
1
•
The conversion base is manufactured from glass-filled PTFE and is supplied with a coarse porosity (40-60 micron porosity) glass support frit and an upper screw clamp Requires a 90 mm 953906 series solvent pickup adapter
•
Part Number 953984-0090
Case Qty
ULTRA-WARE® Glass Inlet Filters with CTFE Union
1
Replacement Parts
Part Number
Description
Case Qty
Part Number 953914-0092
Description
Case Qty
5 µm ULTRA-WARE® Glass Solvent Inlet Filter with CFTE Union, 1/4”-28 Nut and Ferrule for Connection to 1/8” OD Tubing, OD 1/2”, Length 2”
90 mm Upper Screw Clamp 90 mm 40-60 micron Porosity Glass Support Frit
1
953916-2700
1
953914-0091
1
Part Number 953906-0090 Accessories
Replacement Parts
Description
Case Qty
Part Number
Description
Case Qty
90 mm Standard Pickup Adapter 90 mm THF-Resistant Pickup Adapter
1
CTFE Union Female 1/4”-28 to Female 1/4”-28, Internally Threaded for use with Flangeless Fittings
953906-6390
1
H88800-0000
1
Powered by FlippingBook