CHROMATOGRAPHY
103
Microfiltration
47 mm ULTRA-WARE® Microfiltration Assembly with Stainless Steel Support and GL 45 Style Bottle This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. It has a stainless steel support and is recommended for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate. • Supplied with funnel, clamp, 304 stainless steel support screen, PTFE gasket, glass support base, tubing adapter with o-ring, PBT cap, sealing ring and vacuum/pressure bottle • Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly • All components are steam autoclavable • 80 x 80 304 stainless steel mesh, 0.0055” opening size, 19.4% open area, 0.007” wire diameter • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
953751 953751
953753
953753
953810 953810
953811 953751
953801 953751
736400 736400
410170 410170
Part Number 953800-5347
Case Qty
410171 410171
1
Replacement Parts
953900 953900
Part Number 953753-0000
Description
Case Qty
47 mm Anodized Aluminum Clamp
1
Stainless Steel Support Screen for 47 mm Filtration Assembly, 80 x 80 mesh, 304 stainless steel, 0.0095” opening size, 19.4% open area, 0.007” wire diameter 47 mm PTFE Support Screen Gasket
953810-0000
1
953811-4701 953801-5047
1 1
47 mm Glass Support Base
Part Number Accessories
Tubing Adapter for Filtration Assembly, 1/4” x 13-425, Polypropylene with size 108 FKM O-ring
Description
Case Qty
736400-1413
1
Pressure/Vacuum Diaphragm Pump, 115 VAC, 60 Hz, 4.2 Amps, Max free air capacity 1.1 CFM, Ultimate vacuum 25.5” Hg, Noise level <70 DB, 14.4 lb/6.5 kg; 3/8” hose barbs on inlet and outlet
410171-4226
42 mm PTFE/Silicone Sealing Ring
1
923910-0110
1
Adapter Assembly with GL 45 Thread This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread.
• Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly • All components are steam-autoclavable • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 179950-4532
Screw Thread
Case Qty
GL 45
1
Replacement Parts
Part Number
Description
Case Qty
Filtration Adapter Assembly Body Only, 33 expansion borosilicate glass 29 mm PTFE/Silicone Sealing Ring 42 mm PTFE/Silicone Sealing Ring PBT GL-32 Cap with 20 mm Opening Hose Barb Connector for Filtration Assembly, 1/4” x 13-425
179951-3213
1
410171-2916 410171-4226 410170-3220
1 1 1
736400-1413
1
Accessories
Part Number
Description
Case Qty
Solvent Bottle Adapter, GL 45 to 4L Solvent Bottle, Made from PBT, Autoclavable
953907-0000
1
Powered by FlippingBook