112 CLAMPS
Two-Prong Clamp Flat, vinyl covered clamp jaws hold beakers and flasks firmly at any angle, with variable distance from support. • One jaw is fixed, other opens against a stainless-steel compression spring • Opening is gradual to maximum angle, without binding • Noncorrosive, easy-to-clean clamps are nickel-plated zinc with a seamless nickel-plated brass extension tube, brass compressing screw, and pivot pin
Chain Clamp Holds equipment in place at any angle to lattices and rods.
•
Accommodates up to 28 cm (11”) diameter or irregularly shaped objects Quick slip-on chain connection has large, easy-to-turn adjusting knob
•
•
Length of chain is three feet
Extension Arm Length (cm)
Part Number Max Grip Size (cm)
Case Qty
Part Number Max Grip Size (mm) Overall Length (cm) Case Qty 675725-0038 38 20 1 675725-0064 64 23 1
675675-0028
28
13.7
1
Three-Prong Clamp Three-prong extension clamps hold objects ranging from 0.80 to 89 mm securely and safely.
3/8” Lattice Connector Aluminum clamp used to secure rods or clamps such as 675700-0025.
•
Two separate adjustment screws ensure even, precise pressure on glass to minimize the chance of breakage Clamp is easily adjusted to vary holding angle and distance from the stand
• •
Rods are secured using spade-head thumb screws Extension clamps at right angles with 3/8” support rods
•
•
Jaws are coated with non-slip vinyl
Part Number Max Grip Size (mm) Overall Length (cm) Case Qty 675700-0025 25 17 1 675700-0057 57 22 1 675700-0089 89 27 1
Max Rod Grip Size (mm)
Max Rod Grip Size (in)
Part Number
Case Qty
280500-0000
9.5
0.375
1
1/2” Lattice Connector Designed to lock two 13 mm (1/2”) framework rods at a 90° angle.
Three-Prong Open-Yoke Clamp Three-prong extension clamp features an open yoke design for minimum contaminant buildup and easy cleaning.
•
Allen screws are used to secure the rods
•
Open yoke allows the full depth of the clamp to be used unobstructed by the yoke, springs or adjusting screws Two separate adjustment screws ensure precise pressure on glass Supplied with nonslip vinyl coating on jaws and fiberglass finger covers
Part Number Rod Diameter (mm) Rod Diameter (in) Case Qty 675660-0000 13 0.5 1
•
•
3/4” Rod Clamp These clamps are used to secure rods up to 19 mm (3/4”) at right angles.
Part Number Max Grip Size (mm) Overall Length (cm) Case Qty 675710-0025 25 17 1 675710-0057 57 22 1 675710-0089 89 27 1
•
Spade-head thumb screws are used to clamp the rods
Max Rod Grip Size (mm)
Max Rod Grip Size (in)
Part Number
Case Qty
Adjustable Loop Clamp Stainless clamp with flexible 5 mm wide band loops around object, ideal for supporting lightweight apparatus.
675750-0000
19
0.75
1
Hook Connector for ½” Rods Designed to lock two 13 mm (1/2”) framework rods at a 90° angle.
•
Tightened with knurled nut at end of the tubular arm
•
Spade-head thumb screw allows installation without disassembling frame
Max Band Opening Diameter (mm)
Extension Arm Length (cm)
Part Number
Case Qty
Max Rod Grip Size (mm)
Max Rod Grip Size (in)
675650-0005 675600-0008 675600-0012
140
12.7 20.3 30.5
1 1 1
Part Number
Case Qty
90
110
675775-0000
13
41641
1
Powered by FlippingBook