113 CLAMPS
Reaction Flask Clamp Aluminum construction to connect tops to flasks.
Nickel-Plated Standard Taper Joint Clamp These metal clamps are designed to secure Standard Taper joints. The nickel-plating provides increased resistance to heat and cracking.
•
Wing nuts or thumb screws are spaced to assure uniform compression for sealing the system
•
They can withstand temperatures as high as 200 °C, and they have excellent chemical resistance When using a concentrator tube heating mantle, these clamps may be used to secure the concentrator tube to the concentrator flask
Part Number
Description
Case Qty
•
Reaction Flask Clamp, fits ground flange ID 2” Reaction Flask Clamp, fits ground flange ID 4”
296200-0000
1
613750-0000
1
Part Number 675320-0014 675320-0019 675320-0024
Fits Standard Taper Joint
Case Qty
14/35, 14/20 19/38, 19/22 24/40, 24/25
6 6 6
Stainless Steel Standard Taper Joint Clamp A Standard Taper clamp made of corrosion-free stainless spring wire.
Polyacetal Spherical Joint Clamp An easy to use Spherical Joint positive closure clamp made of tough, color coded plastic for use with ball and socket joints.
Part Number 675400-1420 675400-2440
Fits Standard Taper Joint
Case Qty
14/35, 14/20 24/40, 24/25
12 12
•
Clamp will not scratch glass and can be autoclaved to 200 °C This clamp has good chemical resistance at a lower cost than metal clips
•
Polyacetal Standard Taper Joint Clamp Used to secure Standard Taper joints, this positive closure clamp is made of tough, color-coded plastic.
Fits Spherical Joint Size (mm)
Part Number
Color
Case Qty
675310-0013 675310-0019 675310-0029 675310-0035
12/5, 12/312/2
Violet
12 12 12 12
18/9, 18/7
Light Blue Dark Red
•
Clamp will not scratch glass and can be autoclaved to 200 °C Good chemical resistance at a lower cost than metal clips
28/15, 28/12 35/25, 35/20
Light Orange
•
Part Number 675300-0010 675300-0014 675300-0019 675300-0024 675300-0029 675300-0034 675300-0040 675300-0045
Fits Standard Taper Joint
Case Qty
10/30, 10/18 14/35, 14/20 19/38, 19/22 24/40, 24/25 29/42, 29/26 34/45, 34/28 40/50, 40/35
12 12 12 12 12 12 12 12
Spherical Joint Pinch Clamp Used to assemble component parts of Spherical joints and o-ring connector arms.
45/50
•
Sizes 12-A, 18-A and larger have a screw-locking device
The first figure in a Spherical joint designates the diameter of the ball and the second number indicates the bore diameter. For instance, a 35/25 Spherical joint has approximately a 35 mm ball diameter and a 25 mm bore diameter.
Fits O-Ring Connector Size
Part Number
Size
Case Qty
675000-0012 675000-1221 675000-0018 675000-1821 675000-0028 675000-0035 675000-0050 675000-0065 675000-0075 675000-0102
5 5
12
1 1 1 1 1 1 1 1 1 1
12A
7-9 7-9
18
18A
12-15 20-25
28 35 50 65 75
30 40 50 75
102
Powered by FlippingBook