[DWK Life Sciences] Product Overview

CONDENSERS

120

Dewar / Friedrich / Graham / HE / Large Capacity

Friedrich Condenser with Take-Off Tube Friedrich condenser suitable for vertical distillation assembly.

Dewar Condensers with Hose Connection Sidearm Dewar condenser used for rapid cooling of volatile solvents. • Large top opening for easy introduction of coolant mixtures such as solid carbon dioxide/alcohol, dry ice/alcohol, dry ice, or liquid nitrogen • Sidearm is a hose connection for attachment to flexible tubing • Lower joint will work with 675300 polyacetal Standard Taper clamps • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Molded inner spiral provides surface area for the condensation of the product Designed with 150 mm OD delivery tube for product recovery

• •

Full length Standard Taper 24/40 joints

Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Standard Taper Joints

Cold Finger Length (mm)

Part Number

Case Qty

Standard Taper Joints

Fits Tubing ID (inches)

Part Number

Case Qty

456300-2440

24/40

200

1

457500-2420 457500-2425

24/40 24/40

0.375

1 1

Graham Condensers Vapor travels through a coil extending through the length of the condenser and is surrounded by a cooling jacket.

0.5

• •

Standard Taper outer joint at top

Standard Taper inner drip joint at the bottom

Friedrich Condenser with Standard Taper Sidearm Friedrich condenser specially designed to provide a long vapor path, good heat transfer and anti-flooding characteristics.

• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Standard Taper Joints

Part Number

Jacket Length (mm) Case Qty

Molded inner spiral provides surface area for the condensation of the product Inclined Standard Taper outer joint on the side Water inlet and outlet located above ring-sealed inner condensing tube Standard Taper inner drip joint at the bottom

439000-2420 439000-2425 439000-2430 439000-2440

24/40 24/40 24/40 24/40

200 250 300 400

1 1 1 1

• •

High Efficiency Condensers Vapors travel downward and condense in this highly efficient and compact concentrator.

• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Standard Taper Joints

Part Number

Jacket Length (mm) Case Qty

• •

Full length Standard Taper 24/40 joints

Condensate drains through side tube with Standard Taper inner joint to a suitable receiver Vacuum connection provided for reduced pressure operation, if desired

437000-2440 437000-2942

24/40 29/42

225 225

1 1

• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Friedrich Condenser with Hose Connection Sidearm Friedrich condenser used primarily in reflux mode and Soxhlet extractions. • Water inlet and outlet located above ring-sealed inner condensing tube • Standard Taper inner drip joint and side outlet for drying tube, etc • Molded inner spiral provides surface area for the condensation of the product • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Standard Taper Joints

Part Number

Overall Height (mm) Case Qty

444500-2420 444500-2425

24/40 24/40

315 365

1 1

Large Capacity Condensers This large capacity, highly efficient condenser is ideal for pre-pilot and pilot plant operations.

• • •

Full length Standard Taper 29/42 joints Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom

• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Standard Taper Joints

Cold Finger Length (mm)

Part Number

Case Qty

Standard Taper Joints

456250-0021 456250-0022 456250-0023

34/45 45/50 55/50

190 190 190

1 1 1

Part Number

Overall Height (mm) Case Qty

458000-2950

29/42

660

1

Powered by