CONDENSERS
121
Liebig / Reflux
Liebig Condenser with Full Length Water-Cooled 24/40 Joints Water-cooled Standard Taper inner drip and Standard Taper outer joints provide the maximum condensing surface.
Liebig Medium Length Condenser with 14/20 Joints Design eliminates the use of bulbs where holdup is likely to occur. • Lower inner drip joint is designed to extend into 287800- 0000 distillation receiver • Design conforms to NSN 6640-01-346-9222 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
Full length Standard Taper 24/40 joints Hose connections accept 3/8” ID flexible tubing
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Part Number
Jacket Length (mm) Case Qty
Standard Taper Joints
Part Number
Overall Height (mm) Case Qty
448000-2410 448000-2420 448000-2430
24/40 24/40 24/40
220 320 420
1 1 1
282210-0000
14/20
178
1
Coil-Type Reflux Condenser with Two Upper Hose Barbs Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane.
Liebig Condenser with Standard Taper Joints • Standard Taper outer joint at the top • Standard Taper inner drip joint at the bottom • Hose connections accept 3/8” ID flexible tubing • Ref: ASTM Method D322 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• •
With an internal, coil-type cold finger
Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom
•
283000 does not have a drip joint
• Two hose connectors at the top for water inlet and outlet • Ref: ASTM Method D94, D95 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Part Number
Jacket Length (mm) Case Qty
447000-2410 447000-2420 447000-2425 447000-2430 447000-2440 447000-2920
24/40 24/40 24/40 24/40 24/40 29/42
100 200 250 300 400 200
1 1 1 1 1 1
Standard Taper Joints
Part Number
Overall Height (mm) Case Qty
283000-0000 283010-0000 457000-0125 457000-0175 457000-0225
14/20 19/22 24/40 24/40 24/40
200 225 290 340 390
1 1 1 1 1
KIMAX® Liebig Condenser with Full Length 24/40 Joints KIMAX® one-piece sealed unit with a Standard Taper outer joint at the bottom and a Standard Taper inner joint at the top.
Coil Type Reflux Condenser with Removable Hose Connections Detachable polypropylene hose connections provide a safe and easy way to connect and disconnect tubing.
•
With an internal, coil-type cold finger
• • • • •
Inlet end is sloped to avoid trapping condensate
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Drip tip is provided at the lower end
Hose connections accept 5/16 inch ID flexible tubing
Suitable for use with ASTM D849
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints x Jacket Length (mm)
Part Number
Top Joint
Case Qty
283055-0000 283100-0000 457100-0175 457100-0225
14/20 x 100 14/20 x 100 24/40 x 150 24/40 x 250
Offset Standard Taper
1 1 1 1
Standard Taper Joints
Standard Taper Standard Taper Standard Taper
Part Number
Jacket Length (mm) Case Qty
18140-400
24/40
400
1
Powered by FlippingBook