CONDENSERS
122
Reflux / Solvent Saver / West
Solvent Recovery Condensers A versatile solvent condenser designed to recover solvents escaping during evaporative concentrations. It allows users to work safely outside of a hood.
Coil-Type Reflux Condenser with Two Upper Hose Barbs and Angled Outer Joint Coil-type condenser for greater cooling capacity. • Hook above lower Standard Taper joint for use with a 675500 KEM-KLAMP™ • 675000 series polyacetal Standard Taper clamps may also be used • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Upper, lower, and lower offset connectors for 3/8” ID tubing Ref: Analytical Chemistry Vol.47, No.11, Pg.1879, September 1975
•
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Part Number
Overall Height (mm) Case Qty
Part Number
Bottom Hose Connections Case Qty
Upper, Lower, Lower Offset
283050-0000 457050-0000
14/20 24/40
240 370
1 1
547400-0000 Standard Taper 24/40
1
Coil-Type Reflux Condenser with Upper and Lower Hose Barbs Reflux condenser has efficient non-flooding design. • Reflux condenser with a water-cooled inner coil sealed to top and bottom hose connectors • Full length 24/40 joints • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Solvent Saver® for Beakers and Funnels This device offers a unique broad-surface, water-cooled condenser used on top of beakers and funnels for concentrating and refluxing liquids.
•
Convex surface with center drip effectively channels condensed material back into the boiling liquid
• An extension rod allows easy clamping and positioning by hand • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Part Number
Overall Height (mm) Case Qty
456900-2024 456900-3024
24/40 24/40
375 475
1 1
Part Number 459000-0022
Capacity (mL)
Diameter (mm)
Case Qty
2000
150
1
Jacketed Coil Type Reflux Condenser Condenser with water-cooled outer jacket to increase condensation capability.
•
Full length 24/40 joint
• Reflux condenser with an internal coil-type cold finger • Vapors spiraling upward are condensed on the inner wall of the jacket and on the outer surface of the coil • 457270 has a Standard Taper outer joint at the top, a Standard Taper inner drip joint at the bottom and two hose connectors at the top for water inlet and outlet • 457250 has a straight outlet at the top, a Standard Taper inner drip joint at the bottom and two hose connectors at the top for water inlet and outlet • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
West Condenser with Medium Length Joints Useful for refluxing and distillation assemblies.
•
The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium
• •
Medium length Standard Taper joints
Condensate is not restricted with this design
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Standard Taper Joints
Part Number
Overall Height (mm) Case Qty
Part Number
Jacket Length (mm) Case Qty
457250-0225 457270-2425
24/40 24/40
420 420
1 1
282550-0000 282460-0200
14/20 19/22
110 200
1 1
Powered by FlippingBook