124 CONES
Imhoff Sediment Cones Designed for determining small amounts of settleable solids in water and waste effluent as described in the 22 nd Edition of Standard Methods for the Examination of Water and Wastewater, Method 2540 F. It may also be used for measurement of sand content in well water.
•
KIMAX® cone is molded with sturdy uniform walls
• Specially designed with a reinforced tip and beaded rim • Durable white ceramic scale with easy-to-read graduations • Calibrated To Contain • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
Top Diameter (mm) Case Qty
19000-1
1000
108
1
CRUCIBLES
Gooch High Form KIMFLOW® Fritted Disc Crucibles Designed for collecting, drying and weighing precipitates and samples to be analyzed using gravimetric analysis.
Gooch Low Form KIMFLOW® Fritted Disc Crucibles Designed for collecting, drying and weighing precipitates and samples to be analyzed using gravimetric analysis.
• •
Fritted disc is sealed into the crucible
•
Available in fine (4-5.5 microns), medium (10-15 microns), or coarse (40-60 microns) porosities
KIMAX® crucible suitable for precipitates to be dried to a constant weight at 110 °C Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Fritted disc is sealed into the crucible
•
• KIMAX® crucible suitable for precipitates to be dried to a constant weight at 110 °C • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Technical Tip: At higher temperatures, heating in an electric furnace is advised, and exposure to sudden temperature changes should be avoided. For safe handling, crucibles should not be removed until the temperature has been reduced to below 250 °C.
Part Number
Porosity
Capacity (mL)
Case Qty
28250-302
10-15 microns
30
1
Quartz Crucible Designed for muffle furnace ashing procedures. Also very useful for determining trace metals in environmental samples.
Part Number
Porosity
Capacity (mL)
Case Qty
28260-152 28260-301 28260-302 28260-303
10-15 microns 40-60 microns 10-15 microns 4.5-5 microns
15 30 30 30
1
12 12 12
•
Useful where chemical purity is a factor in subsequent analysis Ideal for high temperature applications up to 1050 °C
•
Part Number 319010-0050
Capacity (mL)
Height x OD (mm) Case Qty
50
50 x 49
1
Replacement Parts
Part Number
Description
Case Qty
Quartz Beaker Only, 50mL, 49mm OD, 50mm Height
319011-0050
1
319012-0050
Quartz Cover, 58mm OD
1
Powered by FlippingBook