DAIRYWARE
134
Pipets / Centrifuge Tubes
17.6 mL Sealed To Contain Milk Test Pipets KIMAX® Babcock pipets calibrated to contain 17.6 mL of water (equivalent to an 18 gram milk sample); for use in AOAC/APHA test procedures where blow-out after drainage is specified. • Grooves on the outer surface of the washer allow the air displaced by the incoming milk to escape freely • Specially designed rubber washer is supplied with each pipet and is used to support the pipet in the neck of the test bottle • Scale is permanent brown stain • Marked “Sealed 3” for use in states requiring this special marking • Designed from ASTM Specification E1043, Type II A requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
9mL Sealed To Contain Skim Milk Pipets Sealed-to-contain 9mL skim milk pipets are designed to comply with the Pennsylvania modified Babcock method , as referenced in APHA 15.8, for testing skim milk, lowfat milk, buttermilk or whey .
• •
Calibrated to contain
Scale is permanent brown stain
• Specially designed rubber washer is supplied with each pipet and is used to support the pipet in the neck of the test bottle • Marked with “Sealed 3” for use in states requiring this marking • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type 1I, Class A requirements
Part Number
Capacity (mL)
Calibration Case Qty
580S-9
9
To Contain
1
Overall Length (mm)
Part Number
Capacity (mL)
Case Qty
3005S-176
17.6
330
12
9 mL Wide Tip Cream Pipets KIMAX® 9mL wide tip cream pipets calibrated to deliver 9 mL of milk.
17.6 mL To Deliver Milk Test Pipets KIMAX® Babcock pipets calibrated to-deliver 17.6 mL of water (equivalent to an 18 gram milk sample).
•
Scale is permanent brown stain
• Specially designed rubber washer is supplied with each pipet and is used to support the pipet in the neck of the test bottle • Designed from ASTM Specification E1043, Type III (9 mL) and Type III A (18 mL) requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Calibrated for no blow-out
• Specially designed rubber washer is supplied with each pipet and is used to support the pipet in the neck of the test bottle • Grooves on the outer surface of the washer allow air displaced by incoming milk to escape freely • Scale is permanent brown stain • Designed from ASTM Specification E1043, Type II B requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E-438, Type I, Class A requirements
Part Number
Capacity (mL)
Calibration Case Qty
570-9
9
To Deliver
12
Overall Length (mm)
Part Number
Capacity (mL)
Case Qty
3001-176
17.6
330
12
11mL To Deliver Gerber Milk Test Pipets KIMAX® pipet calibrated to deliver 11 mL of milk.
Graduated Dairyware Centrifuge Tube Used in the determination of the solubility index of dry milk solids or whey products as specified by the American Dairy Products Institute. Also used in pulp determination of citrus products.
• Special rubber washer is supplied with each pipet and is used to support the pipet in the neck of the test bottle • Scale is permanent brown stain • Complies with requirements of APHA/Standard Methods for Analysis of Dairy Products, American Public Health Association (APHA) • Designed from ASTM Specification E1043, Type VI requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• • • •
Graduated and calibrated to contain
All markings are durable black ceramic enamel
Top is beaded for strength
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
Calibration Case Qty
Part Number
Case Qty
3010-11
11
To Deliver
12
45167-50
12
Powered by FlippingBook