DISTILLATION
143
Adapters (Bent)
105° Distillation Bent with Surrounding Jacket Distillation 105 degree bent with surrounding jacket. Used for highly volatile condensates.
75° Distillation Bent Distillation bent 75 degree adapters. Ideal for use as a stillhead adapter.
•
Water jacket completely surrounds adapter
• • •
With Standard Taper inner joints at each end
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Both joints are of the same size
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height (mm) x Overall Width (mm)
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Standard Taper Joints
Part Number
Case Qty
Part Number
Case Qty
159500-2440
24/40
210 x 145
1
272900-0000 272900-1922 158000-2440 158000-2942
14/20 19/22 24/40 29/42
50 x 55 50 x 55
1 1 1 1
130 x 140 130 x 140
105° Distillation Bent with Vacuum Take-Off and Outer Hose Connection Bent with vacuum take-off distillation adapters 105 degree. • Barbed hose connection • Standard Taper inner joint with drip tip at the bottom and Standard Taper outer joint at the top • Joints are the same size •
105° Distillation Bent Distillation 105 degree bent adapters. • Standard Taper inner joint at the bottom and Standard Taper outer joint at the top • Joints are the same size • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Fits Tubing ID (inches)
Part Number
Case Qty
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Part Number
Case Qty
205600-1420 205600-1922 205600-2440
14/20 19/22 24/40
0.25 0.25
1 1 1
0.375
157500-2440 157500-2942
24/40 29/42
140 x 110 150 x 115
1 1
105° Distillation Bent with Vacuum Take-Off and Inner Hose Connection Bent 105 degree with vacuum take-off inner distillation adapter. • Barbed hose connection • Standard Taper inner joint with drip tip at the bottom and Standard Taper outer joint at the top • Joints are the same size • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
105° Distillation Bent with Drip Tip Bent 105 degree distillation adapters. •
Standard Taper inner drip joint at the bottom and Standard Taper outer joint at the top
• •
Joints are the same size
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Fits Tubing ID (inches)
Part Number
Case Qty
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
276400-0000 276410-0000 205500-2440 205500-2942
14/20 19/22 24/40 29/42
0.25 0.25
1 1 1 1
Part Number
Case Qty
0.375 0.375
273200-0000 273200-1922
14/20 19/22
70 x 55 70 x 55
1 1
Long Stem 105° Distillation Bent with Vacuum Take-Off Long Stem 105 degree Bent with Vacuum take-off Distillation Adapters • With a hose connector and a drip tip • Lower tube is extended to 200 mm and may be shortened • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
105° Distillation Bent with Tapered Drip Tube Distillation 105 degree bent adapters with tapered drip tube. • Standard Taper outer joint at top • Tapered drip tube extends into open receivers • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Part Number
Case Qty
Standard Taper Joints
Fits Tubing ID (inches)
Part Number
Case Qty
273100-0000 157000-2440
14/20 24/40
65 x 65
1 1
206000-2440
24/40
0.375
1
115 x 115
Powered by FlippingBook