DISTILLATION
146
Adapters / Traps / Thermometer Centering / Beads
Connecting Distillation Adapter with Vacuum Hose Connection Useful in the sub-boiling separation of mixtures having volatile components.
Transfer Distillation Adapters Used to transfer fluids between two flasks or as a one- piece distillation unit
•
A variety of flasks or adapters may be connected to this unit to use at reduced pressure or under an inert atmosphere
•
Vacuum connection at side accepts ¼” ID flexible tubing
•
All joints are the same size
• • •
Sealed-in drip tip directs condensate Standard Taper inner joints are parallel
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Joints are the same size
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height (mm) x Overall Width (mm)
Standard Taper Joints
Part Number
Case Qty
Standard Taper Joints
Distance Between Joints (mm)
Part Number
Case Qty
211410-2440
24/40
155 x 270
1
275070-1420
14/20
100
1
Foam-Type Distillation Traps Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser.
Distillation Column Packing Beads May be used as mixing beads, boiling stones or packing for distillation columns.
• •
Particularly useful with rotary evaporators 517000 series has baffles which allow vapor to continue through the column and condenser Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
•
KIMAX® glass beads are highly resistant to attack by most cold or hot liquids and/or vapors Solid borosilicate beads are durable and will not disintegrate or affect delicate compounds Packed in 1 lb. (approximately 0.45 kg) containers, 360 cm 3 total volume
•
Standard Taper Joints: Outer; Inner
Bulb Diameter (mm)
•
Part Number
Case Qty
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
275095-0000 275095-2414 197500-2440 517000-2440
14/20; 14/20 24/40; 14/20 24/40; 24/40 24/40; 24/40
42 50 50 65
1 1 1 1
Beads per cubic inch (Approx)
Part Number
Diameter (mm)
Case Qty
Thermometer Centering Device Designed for 6.5 mm OD manual thermometer or 1/4” temperature sensor probe as used on standard Automated Distillation Apparatus with Kimble 26015-125 flasks.
13500-3 13500-4 13500-5 13500-6
3 4 5 6
550 250 125
1 1 1 1
75
• •
Fits glassware designed for rubber stopper size 2 PTFE body with FKM o-ring seal assures proper centering of sensor probe in flask neck
• •
Cap material is yellow polypropylene
Ref: ASTM Method D86
Part Number
Body OD (mm)
Case Qty
26015C-125
6.5
1
Plain Distillation Column Plain fractionating column with indents to support packing. • A variety of packing materials may be used for better separations • 286100-0000 has a drip tip at the bottom • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Three-Way Micro-Distillation Distributor Rotating three-way distributor for use with 251150 distillation adapter.
•
Precise alignment allows distillate to drip directly into the receiver with no wetted surfaces or holdup
• • •
Receiver arms are 120° apart All joints are 14/20 Standard Taper
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints; Overall Length (mm)
Part Number
Type
Case Qty
286000-0021 286000-0022
14/20; 170 14/20; 190
Plain Column Plain Column
1 1
Part Number 251175-0000
Standard Taper Joints
Case Qty
Plain Column with a Drip Tip
286100-0000
14/20; 170
1
14/20
1
Powered by FlippingBook