DISTILLATION
150
Heads / Receivers
24/25 Distillation Receiver Cow Type with Three Receivers Distillation receivers cow-type with 3 receivers. • Cow-type design having three receivers spaced 45° apart • Condensers with drip joints will protrude into the spherical section, keeping wetted surfaces and product hold-up to a minimum
Modified Solvent Distillation Head Designed to maintain distilled solvents in an inert atmosphere.
•
The top of the main vapor tube is open, with an additional vapor tube to decrease the risk of pressure buildup The upper sampling port has a 4 mm stopcock with a Standard Taper 14/20 outer joint for the head A double-oblique stopcock with a Standard Taper 14/20 inner joint allows removal of distilled solvent or return to flask
•
•
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Standard Taper Joint to Condenser
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Part Number
Case Qty
535750-0000
24/40
24/25
1
Standard Taper Joints: Lower and Upper
Part Number
Capacity (mL)
Case Qty
Replacement Parts
Part Number
Description
Case Qty
518550-1450
500
24/40
1
Distribution Adapter for 535800-0000, 24/40 Joints
535751-0000
1
Accessories
Part Number
Description
Case Qty
Size 24 Polyacetyl, Standard Taper Clamp, Green, Fits joint sizes 24/40, 24/25
675300-0024
12
14/20 Distillation Receiver Cow Type with Three Receivers Distillation receivers 14/20 cow type with three receivers. • Cow-type design having three receivers spaced 45° apart • Condensers with drip joints will protrude into the spherical section, keeping wetted surfaces and product hold-up to a minimum
14/20 Four Place Angled Rotating Distillation Receiver Four place rotating distillation receivers 14/20. Rotating distillation receiver allows four flasks to be progressively filled.
•
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints
Fits Tubing ID (inches)
• •
Vacuum adapter is bent at a 105° angle
Part Number
Case Qty
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
287800-0000
14/20
0.25
1
Replacement Parts
Standard Taper Joints
Part Number
Capacity (mL)
Case Qty
Part Number 287801-0000
Description
Case Qty
287900-0000
15
14/20
1
Distribution Adaptor for 287800-0000
1
Replacement Parts
Accessories
Part Number 287901-0000 287902-0000
Description
Case Qty
Part Number
Description
Case Qty
Vacuum Adapter
1 1
Size 14 Polyacetyl, Standard Taper Clamp, Yellow, Fits joint sizes 14/20, 14/35
675300-0014
12
Distribution Adapter
Accessories
Part Number
Description
Case Qty
Size 14 Polyacetyl, Standard Taper Clamp, Yellow, Fits joint sizes 14/20, 14/35
675300-0014
12
Powered by FlippingBook