EXTRACTION
160
Liquid/Liquid Extraction Apparatus
Continuous Liquid/Liquid Extraction with Built-in SLOW-DRY® Concentrator This extractor is designed for EPA priority pollutant samples where the extracting solvent is heavier than water.
Continuous Liquid/Liquid Extraction Apparatus for Heavier than Water Samples This extractor body is designed for EPA priority pollutant samples where the extracting solvent is heavier than water.
•
This technique is sometimes preferred to the separatory funnel Designed for samples of one liter plus approximately 200 mL of extracting solvent Several units may be set up using minimal bench space Extractor body has a Standard Taper 45/50 top joint and a 24/40 side joint Condenser has a Standard Taper 45/50 joint Flask has a Standard Taper 24/40 joint
•
Both extraction and concentration are performed with the same apparatus A unique feature of this unit is the removable Snyder column sidearm and return tube designed for easy cleaning Taller overall height allows longer solvent residence time, increasing efficiency Return tube has a 821001-0004 PTFE plug with a 4 mm bore
•
•
•
•
•
•
• •
•
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Close the PTFE stopcock to stop flow when extraction is complete and concentration commences. Part Number Overall Height (mm) Overall Width (mm) Case Qty 584400-0000 981 298 1
Part Number 584190-0000
Capacity (mL)
Jacket Length (mm) Case Qty
1000
260
1
Replacement Parts
Part Number
Description
Case Qty
Allihn Condenser, 260 mm jacket, 45/50 joint, Fits tubing ID 3/8”, Overall height 365 mm Extractor Body, 45/50 Top joint, 24/40 Side, OD 100 mm 1000 mL Round Bottom Flask, 24/40 Joint, OD 130 mm
Replacement Parts
456000-0022
1
Part Number
Description
Case Qty
584191-0000
1
Allihn Condenser, 260 mm jacket, 45/50 Joint, Fits tubing ID 3/8”, Overall height 365 mm
456000-0022
1
601000-0724
1
570037-0500
500mL Flask, 24/40 Top, 19/22 Bottom 1
15mL SLOW-DRY® Concentrator Tube for Kuderna-Danish w/Clamp, 19/22, Height 130 mm, Subdiv. 0-1 in 0.1, 2-15 in 1 mL Continuous Liquid/SLOW-DRY® Extraction Apparatus, Complete Body (Body, Sidearm, Return Arm, 3 Clamps) Continuous Liquid/SLOW-DRY® Extraction Apparatus, Return Arm, 18/9 Ball Joint Continuous Liquid/SLOW-DRY® Extraction Apparatus, Snyder Sidearm, 35/25 Top, 18/9 Side, 24/40 Bottom
570071-1525
1
584401-0000
1
584403-0000
1
584404-0000
1
Accessories
Part Number
Description
Case Qty
Freidrich Condenser, 190 mm, 45/50 bottom standard taper joint, Fits tubing ID 3/8”, Overall height 340 mm
456250-0022
1
Powered by FlippingBook