EXTRACTION
164
Sublation / SPE Glassware and Manifolds
Replacement Parts
Sublation Extraction Apparatus Designed for the isolation of surfactants from dilute aqueous solutions.
Part Number
Description
Case Qty
24/40 Bottom Joint, Fits Tubing ID 3/8”, Overall Height 80 mm 125mL Gas Washing Bottle
183000-2440
1
•
The operation is described in Standard Methods for the Examination of Water and Wastewater, 22nd edition (Method 5540B) Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
657002-0125
1
•
Accessories
Part Number 586800-0000
Case Qty
1
Part Number
Description
Case Qty
Size 19 Polyacetyl, Spherical Joint Clamp, Lt Blue, fits joint sizes 18/7, 18/9
675310-0019
12
SPE Disk Glassware and Manifolds Our line of SPE glassware and manifolds has been specially designed for use with solid phase extraction disks to give you the highest possible recoveries of extracted analytes from drinking water, surface water and waste water samples. • All SPE manifolds are supplied with three-way valves that allow the venting to atmosphere of each station without affecting the vacuum in the rest of the system • SPE manifolds are manufactured from corrosion-resistant stainless steel • Valves have stainless steel bodies with PTFE plugs • SPE funnels have a sharp edge on the bottom inside diameter that, combined with the stronger spring in our aluminum clamps, minimizes any horizontal capillary action of the sample and solvent into the disk • Extracted samples can be collected directly into K-D concentrator tubes, EPA water analysis vials, sample vials and test tubes up to 30 mm OD x 100 mm high • PTFE-coated stainless steel support screen reduces the possibility of sample-to-sample cross-contamination compared to the traditional glass frit •
Replacement Parts
Part Number
Description
Case Qty
47 mm SPE Glassware Set (Funnel, Support Base, Support Screen, PTFE Gaskets & Clamp)
971100-0047
1
971101-0347 971102-0047
47 mm, 300 mL SPE Funnel 47 mm SPE Support Base
1 1
47 mm SPE Support Screen, PTFE-coated SS 47 mm Anodized Aluminum Clamp 47 mm PTFE Gasket, 25/package (5 included with Glassware Set) SPE Manifold PTFE Valve Plug and Stainless Steel Valve Body 1-Place SPE Manifold, Stainless Steel 3-Place SPE Manifold, Stainless Steel 6-Place SPE Manifold, Stainless Steel
971103-0047
1
953753-0000
1
953811-0000
25
971210-0002
1
971210-1000 971210-3000 971210-6000
1 1 1
PTFE coating also protects the support screen from corrosion caused by acid-preserved samples SPE support bases with 40-35 outer Standard Taper joints have a specially designed internal surface that reduces dead volume and minimizes holdback of the extracted analyte Glassware is manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Accessories
•
Part Number
Description
Case Qty
PTFE Sleeves for Greaseless Connections, 40/35 Joint Pressure/Vacuum Diaphragm Pump, 115 VAC, 60 Hz, 4.2 Amps, Max free air capacity 1.1 CFM, Ultimate vacuum 25.5” Hg, Noise level <70 DB, 14.4 lb/6.5 kg; 3/8” hose barbs on inlet and outlet
676001-4035
6
923910-0110
1
SS Cup ID x Height (mm)
953830-0000 971103-4247 971101-1047
40/35 Glass Cap
1 1 1
Part Number
Includes
Case Qty
47 mm PCTFE SPE Support Screen
47 mm, 1000 mL SPE Funnel
One 47 mm set of glassware and one 1-place manifold Three 47 mm sets of glassware and one 3-place manifold Six 47 mm sets of glassware and one 6-place manifold
90 mm SPE Glassware Set (Funnel, Support Base, Support Screen, & Clamp)
971010-1047
33 x 100
1
971100-0090
1
971103-4290 953753-0090 971101-1090 971102-0090
90 mm PCTFE SPE Support Screen 90 mm Anodized Aluminum Clamp
1 1 1 1
971010-3047
33 x 100
1
90 mm, 1000 mL SPE Funnel 90 mm SPE Support Base
90 mm SPE Support Screen, PTFE- coated SS
971010-6047
33 x 100
1
971103-0090
1
Powered by FlippingBook