FILTRATION
170
25 mm Microfiltration
25 mm ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support The 25 mm vacuum microfiltration assembly is designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. It has a fritted glass support and is used for general filtration. • Supplied with a 40-60 micron porosity fritted glass support base, a 15 mL graduated funnel, an anodized aluminum clamp and a No. 5 silicone stopper • Funnels are graduated from 5 to 15 mL in 1 mL increments • Prefilter size is 16 mm diameter • Approximate filter area is 2.5 cm² • Connection to our 125 mL filtration flask (available as an accessory) is made with a No. 5 silicone stopper • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 953705-0000
Funnel Capacity (mL)
Case Qty
15
1
Accessories
Part Number
Description
Case Qty
125 mL Flask, #5 Stopper Joint, 3/8” Hose Connection 1000 mL Filter Flask, #8 Stopper Joint, 3/8” Hose Connection
953710-0000
1
953760-0000
1
953701-0125 953701-0325
150 mL Glass Funnel, 25 mm 300 mL Glass Funnel, 25 mm
1 1
#8 Silicone Stopper with 3/8” hole, for Use with 1000 mL Flitration Flask
Replacement Parts
953701-0125
1
Part Number 953703-0000 953702-0001 953701-0000 953715-0501
Description
Case Qty
25 mm Anodized Aluminum Clamp 25 mm Fritted Glass Support Base
1 1
15 mL Glass Funnel, 25 mm
1 1
#5 Silicone Stopper with 3/8” hole, for Use
25 mm ULTRA-WARE® Microfiltration Assembly with Stainless Steel Support The 25 mm vacuum microfiltration assembly is designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. It has a stainless steel support and is used for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate. • Supplied with a 316 stainless steel support screen, a PTFE support screen gasket, a glass support base, a 15 mL graduated funnel, an anodized aluminum clamp and a #5 silicone stopper • Funnels are graduated from 5 to 15 mL in 1 mL increments • Prefilter size is 16 mm diameter • Approximate filter area is 2.5 cm² • Connection to our 125 mL filtration flask (available as an accessory) is made with a No. 5 silicone stopper • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 953730-0000
Funnel Capacity (mL)
Case Qty
15
1
Replacement Parts
Part Number 953703-0000
Description
Case Qty
25 mm Anodized Aluminum Clamp
1
25 mm Stainless Steel Support Screen, 80 x 80 mesh, 304 stainless steel, 0.0095” opening size, 19.4% open area, 0.007” wire diameter
953711-0000
1
Accessories
953712-0000 953726-0001 953701-0000
PTFE Support Screen Gasket 25 mm Glass Support Base 15 mL Glass Funnel, 25 mm
25
1 1
Part Number
Description
Case Qty
125 mL Filter Flask, #5 Rubber Stopper Joint, 3/8” Hose Connection 1000 mL Filter Flask, #8 Stopper Joint, 3/8” Hose Connection
953710-0000
1
#5 Silicone Stopper with 3/8” hole for Use with 125 mL Filtration Flask
953715-0501
1
953760-0000
1
953701-0125 953701-0325
150 mL Glass Funnel, 25 mm 300 mL Glass Funnel, 25 mm
1 1
#8 Silicone Stopper with 3/8” Hole for Use with 1000 mL Filtration Flask
953701-0125
1
Powered by FlippingBook