FILTRATION
174
47 mm Microfiltration
47 mm ULTRA-WARE® Microfiltration Assembly with Solvent Pick-Up Adapter and Ground Joint This all glass microfiltration system eliminates pouring HPLC solvents into funnels. • The solvent pickup adapter draws solvent directly from a reagent bottle through a 47 mm filter and into a filter flask • After filtration is complete, the HI-VAC valve on the solvent pickup adapter can be turned off for vacuum degassing • Existing ULTRA-WARE® and Millipore filtration assemblies are easily converted to in-line filtration/ degassing by replacing existing funnels with solvent pickup adapters. They clamp to support bases in the same way that funnels do • This system comes with a solvent pickup adapter, a coarse porosity fritted glass filter base, an inner joint flask and an aluminum clamp • Filter base has an integral hose connection above the filtrate drip tip to prevent contamination of the vacuum line with filtrate droplets • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
953906
953753
953826
953827 953829
Standard Taper Joints
Part Number Flask Capacity (mL)
Case Qty
953820-1047 953820-4047
1000 4000
40/35 40/35
1 1
Replacement Parts
Part Number 953753-0000 953826-0000 953827-0000 953829-0000
Description
Case Qty
47 mm Anodized Aluminum Clamp 47 mm, 40/35 Fritted Glass Support Base
1 1 1 1
Accessories
1000 mL Flask, 40/35 inner joint 4000 mL Flask, 40/35 inner joint
Part Number 953830-0000
Description
Case Qty
47 mm Standard Pickup Adapter with 1/4” OD PTFE tubing
40/35 Glass Cap
1
953906-0047
1
47 mm Microfiltration Assembly with Stainless Steel Support and Ground Joint The 47 mm filtration apparatus with stainless steel support is recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate. • This apparatus is also used to produce ultra-clean filtrate since the stainless steel screen will not shed particles into the filtrate • The ground joint connection eliminates the possible phthalate contamination that can occur when using silicone or neoprene stoppers • Each apparatus is supplied with a funnel, an anodized aluminum clamp, a stainless steel support screen, a PTFE gasket, a 47 mm glass support base and a filtration flask • 80 x 80 304 stainless steel mesh, 0.0055” opening size, 19.4% open area, 0.007” wire diameter • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
953751
953753
953810
953811
953852
Funnel Capacity (mL)
953827
Part Number Flask Capacity (mL)
Case Qty
953855-1047
1000
300
1
Replacement Parts
Part Number 953753-0000
Description
Case Qty
47 mm Anodized Aluminum Clamp
1
Accessories
Stainless Steel Support Screen for 47 mm Filtration Assembly, 80 x 80 mesh, 304 stainless steel, 0.0095” opening size, 19.4% open area, 0.007” wire diameter 47 mm PTFE Gasket, 25/package (5 included with Glassware Set)
Part Number
Description
Case Qty
953810-0000
1
PTFE Sleeves for Greaseless Connections, Fit Standard Taper Joint 40/35
676001-4035
6
953811-0000
25
953828-0000 953829-0000 953830-0000 953761-0000 953771-0000 953781-0000
2000 mL Flask, 40/35 inner joint 4000 mL Flask, 40/35 inner joint
1 1 1 1 1 1
953852-0001 953827-0000 953751-0000
47 mm, 40/35 Glass Base
1 1 1
40/35 Glass Cap
1000 mL Flask, 40/35 inner joint 300 mL Glass Funnel, 47 mm
100 mL Glass Funnel, 47 mm 500 mL Glass Funnel, 47 mm 1000 mL Glass Funnel, 47 mm
Powered by FlippingBook