FILTRATION
175
90 mm Microfiltration
Adapter Assembly with GL 45 Thread This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. • Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly • All components are steam-autoclavable • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 179950-4532
Screw Thread
Case Qty
GL 45
1
Replacement Parts
Part Number
Description
Case Qty
Filtration Adapter Assembly Body Only, 33 expansion borosilicate glass 29 mm PTFE/Silicone Sealing Ring 42 mm PTFE/Silicone Sealing Ring PBT GL-32 Cap with 20 mm Opening Hose Barb Connector for Filtration Assembly, 1/4” x 13-425
179951-3213
1
410171-2916 410171-4226 410170-3220
1 1 1
736400-1413
1
410170-4534
PBT GL-34 Cap with 34 mm Opening
1
Accessories
Part Number
Description
Case Qty
Solvent Bottle Adapter, GL 45 to 4L Solvent Bottle, Made from PBT, Autoclavable
953907-0000
1
90 mm ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with fritted glass support is used for general filtration.
• Filtration rates are up to four times faster than 47 mm filters • The funnel is graduated from 300 to 1000 mL in 50 mL increments • Maximum funnel capacity is 1100 mL • Prefilter size is 70 mm diameter; approximate filter area is 38.5 cm² • Connection to our 1 liter filtration flask (available as an accessory) is made with a #8 silicone stopper • Unit is supplied with a 40-60 micron porosity fritted glass support base, a 1 liter graduated funnel, an anodized aluminum clamp and a #8 silicone stopper • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height (mm), Clamp Width (mm)
Funnel Capacity (mL)
Part Number
Case Qty
953755-0090
1000
160 x 350
1
Replacement Parts
Accessories
Part Number 953753-0090 953752-0090 953781-0090
Description
Case Qty
Part Number
Description
Case Qty
90 mm Anodized Aluminum Clamp 90 mm Fritted Glass Support Base 1000 mL Glass Funnel, 90 mm
1 1 1
1000 mL Filter Flask, #8 Stopper Joint, Fits Tubing ID 3/8” 1000 mL KimCote™ Filter Flask, #8 Stopper Joint, Fits Tubing ID 3/8”
953760-0000
1
#8 Silicone Stopper with 9?16” Hole for 1000 mL Filtration Flask
953760-1002
1
953763-0801
1
Powered by FlippingBook