FLASKS
187
Class A Volumetric
Class A Volumetric Flasks with Polyethylene Stopper • KIMAX® flask with a graduation ring blasted on the neck • Calibrated to contain • With a marking spot on sizes 10 mL and larger • Supplied with a 28160R polyethylene stopper to fit in the Standard Taper ground neck • Enlarged top of the stopper will protect the neck if the flask is tipped over • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
KimCote® Class A Volumetric Flasks with Pennyhead Glass Stopper • Autoclavable KimCote® safety coating reduces the hazards of shattered glass and leakage of toxic or corrosive chemicals
• • • • •
A single graduation ring is blasted on the neck
Calibrated to contain
A Standard Taper ground glass stopper is supplied
Marking spots on all sizes
Designed from ASTM Specification E288, Class A requirements
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Capacity; Tolerance (mL)
Standard Taper Stopper
Part Number
Case Qty
Capacity; Tolerance (mL)
Standard Taper Stopper
Part Number
Case Qty
28014P-5 28014P-10 28014P-25 28014P-50 28014P-100 28014P-200 28014P-250 28014P-500 28014P-1000 28014P-2000
5; ±0.02 10; ±0.02 25; ±0.03 50; ±0.05 100; ±0.08 200; ±0.10 250; ±0.12 500; ±0.20 1000; ±0.30 2000; ±0.50
9 9 9 9
12 12 12 12 12 12 12 12
KC28014-100 KC28014-250 KC28014-500 KC28014-1000 KC28014-2000
100; ±0.08 250; ±0.12 500; ±0.20 1000; ±0.30 2000; ±0.50
13 16 19 22 27
12 12 12
13 16 16 19 22 27
4 2
6 4
Replacement Parts
Part Number
Description
Case Qty
Size 13 Solid Pennyhead Stopper, Medium Length Size 16 Solid Pennyhead Stopper, Medium Length Size 19 Solid Pennyhead Stopper, Medium Length Size 22 Solid Pennyhead Stopper, Medium Length Size 27 Solid Pennyhead Stopper, Medium Length
850100-0013
1
Replacement Parts
850100-0016
1
Part Number
Description
Case Qty
Size 9 Linear High-Density Polyethylene Stopper Size 13 Linear High-Density Polyethylene Stopper Size 16 Linear High-Density Polyethylene Stopper Size 19 Linear High-Density Polyethylene Stopper Size 22 Linear High-Density Polyethylene Stopper Size 27 Linear High-Density Polyethylene Stopper
28160R-9
6
850100-0019
1
28160R-13
6
850100-0022
1
28160R-16
6
850100-0027
1
28160R-19
6
28160R-22
6
Choose KimCote® Plastic-Coated Glassware for an Added Measure of Safety! KimCote® protective glassware coating goes beyond traditional coatings. Should a break occur, KimCote® will reduce the hazards of shattered glass and leakage of toxic or corrosive chemicals. It’s ultra-clear, extremely durable, autoclavable and resistant to many common laboratory chemicals. KimCote’s unique texture also provides a non-slip handling surface, wet or dry. An MSDS and a certificate of compliance are available by contacting our customer service. KimCote® is a trademark of DWK Life Sciences.
28160R-27
6
Powered by FlippingBook