FLASKS
196
Erlenmeyer
Pennyhead Glass Stopper Erlenmeyer Flasks • KIMAX® flask with a Standard Taper ground glass stopper neck finish • With capacity scale • Stopper is included • Heights shown in table are without the stopper • Replacement stopper is 850100 (glass), 41901R (PTFE) or 28160R (poly) • Designed from ASTM Specification E1404, Type II, Class II requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
RAY-SORB® Erlenmeyer Flasks •
RAY-SORB® processed to protect materials sensitive to the light of shorter wavelengths Less than 1% transmission below 400 nm and approximately 5% transmission from 400-600 nm
•
• •
Without a capacity scale
Standard Taper PTFE stopper is supplied with the flask
•
Replacement stopper is 41901R
• Designed from ASTM Specification E1404, Type II, Class II requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements and then RAY-SORB® processed
Standard Taper Stopper
Part Number
Capacity (mL)
Case Qty
Standard Taper Stopper
Part Number
Capacity (mL)
Case Qty
26600-25 26600-50 26600-125 26600-250 26600-500 26600-1000
25 50
16 19 22 27 32 32
12 12 12 12
26610-50 26610-125 26610-250 26610-500
50
19 22 27 32
1 1 1 1
125 250 500
125 250 500
8 6
1000
Replacement Parts
Part Number
Description
Case Qty
Size 16 Solid Pennyhead Stopper, Medium Length Size 19 Solid Pennyhead Stopper, Medium Length Size 22 Solid Pennyhead Stopper, Medium Length Size 27 Solid Pennyhead Stopper, Medium Length Size 32 Solid Pennyhead Stopper, Medium Length
MICROFLEX® Screw Cap Graduated Erlenmeyer Flasks Graduated flask useful for sample collection, derivatization reactions, extractions, sample storage, micro mixing, etc.
850100-0016
1
850100-0019
1
850100-0022
1
850100-0027
1
•
Supplied with open top phenolic cap and PTFE- lined silicone septum See 410116 for replacement cap and 774161 for septum
850100-0032
1
•
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Capacity (mL) GPI Finish Case Qty 749400-0025 25 20-400 12
Alternate Stoppers
Part Number
Description
Case Qty
Size 16 Linear High-Density Polyethylene Stopper Size 19 Linear High-Density Polyethylene Stopper Size 22 Linear High-Density Polyethylene Stopper Size 27 Linear High-Density Polyethylene Stopper Size 16 Blue PTFE Key-Head Stopper, Diameter at Large End 16.5 mm, Length of Ground Zone 15.0 mm Size 19 Green PTFE Key-Head Stopper, Diameter at Large End 19.7 mm, Length of Ground Zone 17.0 mm Size 22 Yellow PTFE Key-Head Stopper, Diameter at Large End 22.05 mm, Length of Ground Zone 20.5mm Size 27 Red PTFE Key-Head Stopper, Diameter at Large End 27.15 mm, Length of Ground Zone 21.5mm Size 32 Grey PTFE Key-Head Stopper, Diameter at Large End 32.15 mm, Length of Ground Zone 21.5 mm
28160R-16
6
28160R-19
6
Replacement Parts
28160R-22
6
Part Number
Description
Case Qty
Septa, PTFE-Faced with Silicone rubber backing, fits threaded cap size 20 mm, 0.005” PTFE thickness, 0.060” Silicon Rubber thickness 20-400 Black Phenolic Unlined, Open Top Cap, 12 mm Hole ID
28160R-27
6
774161-0020
24
41901R-16
6
73804-20400
144
41901R-19
6
41901R-22
6
41901R-27
6
41901R-32
6
Powered by FlippingBook