FLASKS
206
Distilling / Dewar
Pear Shaped Two Neck Heavy Wall Distilling Flasks • Two-neck flask with outer joints • Heavy wall • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Engler Distilling Flasks KIMAX® distilling flask.
•
Sidearm tube is sealed at an angle of 75° from the neck and is 137 ± 3 mm from the bottom of the flask Designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802
•
• •
Ref: ASTM Method D86
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper Joints: Center, Side
Part Number Capacity (mL)
Case Qty
294750-0010 294760-0050
10 50
14/20, 10/30 14/20, 14/20
1 1
Part Number Capacity (mL)
Rubber Stopper Size Case Qty
26015-125
125
2
24
Pear Shaped Three Neck Heavy Wall Distilling Flasks • Three-neck flask with outer joints • Heavy wall •
Engler Distilling Flasks with Three Reference Lines
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
For use with Haage automatic distillation apparatus or others that call for three thermometer depth insertions.
Capacity (mL)
Standard Taper Joints: Center, Side
Part Number
Case Qty
•
KIMAX® distilling flask, same as 26015-125, except with three reference lines
295740-0050
50
14/20, 14/20
1
• •
Ref: ASTM D86
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Distilling Flasks with Standard Taper Joint Sidearm • Standard Taper 24/40 • 1000 mL capacity • Manufactured from 33 expansion, low
Rubber Stopper Size
Part Number
Capacity (mL)
Case Qty
26016-125
125
2
24
extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Thermometer Centering Device Designed for 6.5 mm OD manual thermometer or 1/4” temperature sensor probe as used on standard Automated Distillation Apparatus with Kimble 26015-125 flasks.
Standard Taper Joints
Part Number
Capacity (mL)
Case Qty
605030-1524
1000
24/40
1
• •
Fits glassware designed for rubber stopper size 2 PTFE body with FKM o-ring seal assures proper centering of sensor probe in flask neck
• •
Cap material is yellow polypropylene
Ref: ASTM Method D86
Barrett Distilling Flasks •
Barrett distilling flasks made to ASTM E133 specifications These flasks feature smooth, consistent, heavy walls for uniform heating and minimal breakage
Part Number
Body OD (mm)
Case Qty
26015C-125
6.5
1
•
• •
Supplied with one cork for the sidearm
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Jacketed Dewar Flasks Specially constructed Dewar flask is fully jacketed with aluminum for excellent insulation of contents.
Rubber Stopper Size
Part Number
Capacity (mL)
Case Qty
•
Viewing ports allow visual inspection of the contents through the strip-silvered glass Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
610910-0125 610900-0200
125 200
2 3
12 24
•
Part Number 611795-2430
ID (mm)
Depth (mm)
Case Qty
95
300
1
Powered by FlippingBook