225 GAS SAMPLING / WASHING
Tubes
Gas Sampling Tubes with PTFE Valves Designed for the collection and storage of environmental samples.
Fritted Gas Dispersion Tubes Gas dispersion tube with a hollow fritted cylinder at the end of the tube.
•
High vacuum valves are provided for evacuation and filling Open top cap with a PTFE/silicone septum allows analytical samples to be withdrawn Both ends are ground to accept 3/8” ferrules and hand-compressible fittings for a gas-tight seal Each size has a marking area for easy identification
•
Available with coarse (40-60 micron) or extra coarse (170-220 micron) porosity cylinder
•
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
• •
Overall Height, Column Height (mm)
Porosity (microns)
Part Number
Case Qty
Valve plug is 826601-0004
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
956500-0023 956500-0025
250, 24 250, 24
40-60
1 1
170-220
Overall Height x Width (mm)
Capacity (mL), GPI Finish
Part Number
Case Qty
653150-0125 653150-0250 653150-0500
90 x 345 95 x 290 100 x 350
125, 13-425 250, 13-425 500, 13-425
1 1 1
Gas Sampling Tubes with Glass Plugs and Plain Ends KIMAX® gas collecting tube with tubulations on each end of the tube.
Replacement Parts
Part Number 410116-1325
Description
Case Qty
• •
Tubulations accept 3/8 inch ID tubing
PTFE-Lined 13-425 Phenolic Cap 1 653151-0125 125mL Gas Sampling Tube, Glass, for 653150 1 653151-0500 500mL Gas Sampling Tube, Glass, for 653150 1
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number OD, Length (mm) Capacity (mL) Case Qty 30040-500 65, 360 500 1
Septum, PTFE Faced Silicone, 13mm Thread Cap Size, PTFE Thickness 0.005”, Silicon Rubber Thickness 0.060”
774161-0013
48
826601-0004
Size 4 Valve Plug
1
Gas Sampling Tubes with PTFE Stopcock Plugs KIMAX® gas collecting tube with tubulations on each end of the tube that accept 3/8 inch ID flexible tubing.
•
Replacement PTFE stopcock plug is 41500F
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
OD, Length (mm)
Capacity (mL)
Case Qty
30040F-250
50, 330
250
1
Replacement Parts
Part Number
Description
Case Qty
4 mm bore PTFE Stopcock Plug, Plug Size (mm) 15.2/30
821001-0004
1
Powered by FlippingBook