KITS & LABSETS
253
Accessories for Microscale Standard Taper 14/10 Threaded Kits
Connecting Adapters This adapter is used for connecting various components in an airless or distillation application. Use with 746020 connecting adapter for micro “H” configuration or as a cross for decanting applications. • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Hickman Distillation Head The Hickman distillation head is designed for short path atmospheric or vacuum distillations with quantities ranging from a fraction of a milliliter to three milliliters. • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Standard Taper Joints
GPI Finish
Case Qty
Part Number 746320-0000
Case Qty
1
746070-0000
14/10
20-400
1
Vacuum Inlet Adapter This adapter is for use with plain-stemmed apparatus with 5 to 8 mm OD.
Bent Drying Tubes This drying tube is used with an unsealed system to protect moisture-sensitive reactions from the atmosphere.
•
Compression cap and FKM o-ring provide a vacuum-tight seal and allow for adjustment.
• Modified drying tube with an expansion bulb for CaCl 2 , as shown in the textbook, Microscale Organic Chemistry, Szafran, Pike, Singh, John Wiley & Sons, Inc. • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Overall Length x Width (mm) OD of Bulb (mm) Case Qty 746095-0000 45 x 85 30 1
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Standard Taper Joints
Fits Tubing ID (inches)
Case Qty
746035-0814
14/10
0.25
1
Cold Finger Condenser
Schlenk Tubes These Schlenk tubes are designed to minimize the loss of volatile solvents while manipulating under normal conditions. • Working capacity is 5 mL to less than 1 mL solvent or 100 mg to less than 1 mg substrate • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Overall Height x Width (mm) Standard Taper Joints
•
Micro-adjustable
• Drip tip on the bottom directs drops into the collar of Hickman distillation heads • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Standard Taper Joints Fits Tubing ID (inches)
Case Qty
746065-0000
14/10
0.25
1
Case Qty
Replacement Parts
14/10 with 1/4” Hose Connection 14/10 with Size 2 PTFE Valve
746340-0005
142 x 48
1
Part Number
Description
Case Qty
Adjustable Height Cold Finger Condenser, 14/20 Standard Taper Joints, Fits Tubing ID 1/4”, 7 mm Hole Diameter, 150 mm Length Below Joint, 183 mm Overall Height Inlet, Thermometer, Universal, BEVEL-SEAL, Accomodation Range 5-8 mm, Fits Tubing ID 1/4”, 15-415 GPI Thread, O-Ring Size 108, 14/10 Standard Taper Joints
746345-0005
142 x 65
1
282010-0000
1
Sublimator Sublimation assembly with vertically adjustable condenser tube for use with microscale vessels. • Consists of funnel condenser (746125-0001) and inlet adapter with cap and o-ring (746035-0814) • Condenser has vertically adjustable tube • Adapter has 5 to 8 mm ID range • Compression cap and FKM o-ring provide a vacuum-tight seal and allow for adjustment • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Standard Taper Joints Fits Tubing ID (inches)
746035-0814
1
Vigreux Distilling Column
•
Threaded top
• Indentations over the entire length improve vapor-liquid contact • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Case Qty
746125-0001 746035-0814
14/10 14/10
1 1
Part Number
Standard Taper Joints
GPI Finish
Case Qty
0.25
746150-0000
14/10
20-400
1
Powered by FlippingBook