KITS & LABSETS
255
Accessories for Microscale Standard Taper 14/10 Threaded Kits
MICROCAPS® Capillary Tubes Drummond Microcaps® are ideal for spotting preadsorbent TLC plates.
Vacuum Adapter This adapter is bent at 105° with hose connector and drip tip and permits “closed system” applications. • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• • •
Ingeniously simple in concept and in use Precision-bore glass capillary tubes
Cut to predetermined lengths, so that each capillary tube will hold a known volume of fluid when filled So inexpensive that it is almost always practical to dispose of the tube after use
•
Part Number
Standard Taper Joints
GPI Finish
Case Qty
• •
No unusual training or skills are required
Immediate, professional results
746040-0000
14/10
20-400
1
• Supplied with one bulb assembly and one dispenser vial with 100 micropipets • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Aluminum Heating Blocks Ideal for use in place of a sand bath in microscale experiments.
Filling is simple. Capillary action, not externally applied suction, draws the fluid into the tube. To dispense the fluid, simply squeeze the bulb.
• •
Excellent heat transfer
Part Number Capacity (µL)
Length (mm)
Case Qty
Does not interfere with magnetic stirring
764500-0050 764500-0100 764500-0025 764500-0010 764500-0020 764500-0000 764500-0001 764500-0002 764500-0005
0.5
32 32 32 32 41 64 65
100 100 100 100 100 100 100 100 100
1 2 5
Part Number
Case Qty
Application
720200-0001 For Standard Taper size 14/10 Kits (Solid Bottom)
1 1
10 20 25
720200-0002
For Williamson Kits (Solid Bottom)
For All Micro Kits (Open Bottom)Four Holes - (2)9/16”, 13/16”, 21/32”
720205-0001
1
50
100 116
720210-0001
For Vials (Split Block)
1
100
Non-Sterile Pasteur Pipets These Pasteur-type pipets are intended for one-time use in the transfer of small volumes.
Accessories
Part Number
Description
Case Qty
•
63A54P and 63B93P are cotton-plugged
• 63C50 is a blood bank dropper which dispenses 25 ±3 drops per 1 ml. of serum or red cells at 23 °C when held at a 45° angle • 63DP1005 is a monstr-pette which has a tip ID of 1.5 mm • Soda lime pipets are manufactured from 90 expansion soda lime glass conforming to USP Type III requirements • Borosilicate pipets are manufactured from 51 expansion, low extractable borosilicate glass conforming to USP Type 1 and ASTM E438, Type 1, Class B requirements Part Number OD (mm) x Body Length (in) Feature Case Qty 883350-0575 7 x 3.5 Borosilicate 250 883350-0009 7 x 4 Borosilicate 250 63A54 7 x 3.5 Soda-lime 1000 63B93 7 x 4 Soda-lime 1000 63A54P 7 x 3.5 Soda-lime, Cotton-plugged 1000 63B93P 7 x 4 Soda-lime, Cotton-plugged 1000 63C50 7 x 3.5 Soda-lime blood bank dropper 1000 63DP1005 7 x 3.5 Soda-lime 800 Sand Bath Dish This dish is useful as a sand bath for heating microscale reactions. • Top of each KIMAX® dish is reinforced and fire-polished to reduce chipping • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Bi-Metallic 10-290 °C Thermometer, Stem OD 4 mm
309180-0290
1
Sand Bath Heating Mantles This mantle is recommended for performing the experiments in the Williamson textbook.
• •
Electrically heated
Utilizes commercially available sand used for children’s sandboxes
•
Designed for 100 mL flask
• Supplied with a one-meter, 3-wire cord and a standard U.S. plug • CSA certified
Part Number 720500-0101
Capacity (mL)
Voltage (V)
Case Qty
100
115
1
Accessories
Part Number
Case Qty
Description
748035-0023 Sand, 16-30 mesh, 10 lbs
1
Power Control for Sandbath Heating Mantle, 115V, for 720500, 8 Amps current, 50/60 Hz
720600-0115
1
Part Number
Overflow Capacity (mL)
Height x OD (mm)
Case Qty
23000-8040
40 x 80
170
24
Powered by FlippingBook