274 PETROCHEMICAL
Bottles / Containers / Jars / Burets
Static Dilution Bottles The static dilution bottle provides a simple, inexpensive means to prepare, store and use standards of volatile organic compounds.
Class A Burets, Serialized and Certified, Straight Bore PTFE Stopcock, with Dust Cap KIMAX® precision bore buret is permanently marked with an individual serial number. Supplied with a Certificate of Graduation Accuracy. Designed from ASTM Specification E287, Class A requirements. KIM-KAP® dust cap is included. Delivery stem of the 10 mL size is 115 mm long to meet requirements of potentiometric titration burets (ASTM D664). PTFE plug for all sizes is 2. Scale is a durable white ceramic enamel. Replacement stopcock is 821001-0002.
•
Standards are prepared by injecting a small quantity of the pure compounds into the bottle and using heat to fully evaporate.
• A push-pull, color-coded, (green-for-open, red-for-closed) Mininert valve is supplied for easy use and long lasting performance • The valve is excellent for sealed tube reactions, long term storage of standards or periodic addition of reactants • Sample aliquots are withdrawn using a gas-tight syringe • Septum seal prevents leakage when using a syringe • Standards prepared by this method are stable for up to one week • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Tolerance (mL)
Case Qty
Part Number
Capacity (mL)
17027F-10 17027F-25 17027F-50 17027F-100
10 25 50
±0.02 ±0.03 ±0.05 ±0.10
1 1 1 1
100
Part Number 591190-2000
Capacity (mL)
Valve Thread Case Qty
2000
24-410
1
Class A Serialized and Certified Automatic Zero Burets with PTFE Stopcock and Reservoir Bottle KIMAX® precision bore automatic burets are used in applications requiring the highest degree of precision and accuracy for volumetric analysis. These are ideal for repeat titrations requiring traceable volumetric accuracy or when the titrant should not be handled.
•
Packed complete with a reservoir bottle, U-shaped drying tube, vented connecting tube, rubber squeeze bulb, # 1 single-holed rubber stopper, PTFE stopcock plug and 1/4 inch ID rubber tubing Precision ground tips assure uniform outflow Supplied with a chemically-resistant, self- lubricating PTFE stopcock plug Permanently marked with an individual serial number and traceable to NIST Standards Supplied with a Certificate of Graduation Accuracy Easy-to-read durable black enamel scale Replacement 2 mm bore size stopcock plug is 823001-0002. Manufactured to the specifications found in ASTM E694 Calibrated to the accuracy requirements found in ASTM Specification E542 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Sample Containers This sample container is for use in the determination of the stability of gasoline under accelerated oxidation conditions.
• •
•
The cover is intended to prevent material that is refluxing back into the bomb stem from contaminating the sample • Ref: ASTM D525 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
• • •
Part Number 896670-0000
Overall Height (mm)
Width (mm) Case Qty
•
110
50
1
•
•
Cold Test Jar KIMAX® jar used to determine the temperature (cloud point) at which haziness is first observed at the bottom of the jar when petroleum oils are cooled and examined under specified conditions (ASTM D2500), and also the temperature at which chilled undisturbed oils will pour (ASTM D97). • Jar has a flat bottom and a reinforced bead at the open end • With a marking spot and a graduation ring located 54 mm from the inside bottom • Ref: ASTM Method D97, D2500 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Buret Capacity (mL)
Tolerance (mL)
Case Qty
Part Number
17124F-10 17124F-25 17124F-50 17124F-100
10 25 50
±0.02 ±0.03 ±0.05 ±0.10
1 1 1 1
100
Procedure for Using Automatic Buret 17124F: Place the one-holed rubber stopper, large end first, on the lower tubulation of the buret. Add the U-shaped drying tube, prefilled with drying medium, over the small end of the stopper. Join the drying tube to the connecting tube and then the rubber squeeze bulb with the rubber tubing. To fill the buret, turn the stopcock to connect, filling tube to the buret. Squeeze the rubber bulb several times while closing the vent hole in the connecting tube with your finger. As liquid rises and overflows from the tip above the buret, turn the stopcock to off and remove your finger from the vent hole of the connecting tube. If air is trapped in the stopcock or tip, discharge the air and repeat the filling operation to automatic zero at overflow tip.
Part Number
Height (mm)
OD (mm)
Case Qty
32501-99
125
35
36
Powered by FlippingBook