277 PETROCHEMICAL
Condensers
Friedrich Condenser with Hose Connection Sidearm Friedrich condenser used primarily in reflux mode and Soxhlet extractions.
Allihn Condensers with Full Length Joints Used in many refluxing operations.
• Water inlet and outlet located above ring-sealed inner condensing tube • Standard Taper inner drip joint and side outlet for drying tube, etc • Molded inner spiral provides surface area for the condensation of the product • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• Standard Taper drip joint at bottom and a Standard Taper outer joint at top • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Overall Height (mm)
Standard Taper Joints
Case Qty
431000-2420 431000-2425 431000-2430 431000-2440 431000-2920 431000-2930
370 425 470 570 380 480
24/40 24/40 24/40 24/40 29/42 29/42
1 1 1 1 1 1
Part Number
Cold Finger Length (mm)
Standard Taper Joints
Case Qty
456250-0021 456250-0022 456250-0023
190 190 190
34/45 45/50 55/50
1 1 1
Graham Condensers Vapor travels through a coil extending through the length of the condenser and is surrounded by a cooling jacket.
Friedrich Condenser with Standard Taper Sidearm Friedrich condenser specially designed to provide a long vapor path, good heat transfer and anti-flooding characteristics.
• • •
Standard Taper outer joint at top
•
Molded inner spiral provides surface area for the condensation of the product Inclined Standard Taper outer joint on the side Water inlet and outlet located above ring-sealed inner condensing tube Standard Taper inner drip joint at the bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Standard Taper inner drip joint at the bottom
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• • • •
Part Number
Jacket Length (mm)
Standard Taper Joints
Case Qty
439000-2420 439000-2425 439000-2430 439000-2440
200 250 300 400
24/40 24/40 24/40 24/40
1 1 1 1
Part Number
Jacket Length (mm)
Standard Taper Joints
Case Qty
437000-2440 437000-2942
225 225
24/40 29/42
1 1
Liebig Condenser with Standard Taper Joints • Standard Taper outer joint at the top • Standard Taper inner drip joint at the bottom • Hose connections accept 3/8” ID flexible tubing • Ref: ASTM Method D322 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Coil-Type Reflux Condenser with Two Upper Hose Barbs Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane.
• •
With an internal, coil-type cold finger
Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom
• Two hose connectors at the top for water inlet and outlet • Ref: ASTM Method D94, D95 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Jacket Length (mm)
Case Qty
Standard Taper Joints
447000-2410 447000-2420 447000-2425 447000-2430 447000-2440 447000-2920
100 200 250 300 400 200
24/40 24/40 24/40 24/40 24/40 29/42
1 1 1 1 1 1
Approx. Condensing Area (cm²)
Part Number
Case Qty
283010-0000 457000-0125 457000-0175 457000-0225
94
1 1 1 1
115 170 229
Powered by FlippingBook