279 PETROCHEMICAL
Cylinders / Distillation
Class B Cylinders for Emulsion Test KIMAX® cylinder used in the determination of emulsifying and demulsifying tendencies of lubricating oils (ASTM D1401). • “TC” appears on each cylinder and indicates the cylinder is calibrated to contain • Round base to fit baths in which this cylinder is generally used • Pour spout • Ref: ASTM Method D1401 • Scale is durable white ceramic enamel • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Dean Stark Distillation Receivers Ideally suited for the determination of water content in organic solvents.
•
Dean Stark design for solvents that are classified as either heavier than water or lighter than water
• Unit is compact in both the Standard Taper 24/40 and Standard Taper 14/20 sizes • Lower three-way stopcock provides a sample port, and the apparatus can be drained without disassembly • Trap area is positioned well above the boiling flask • Thermometer joint is Standard Taper 10/30. Stopcock plug is 822501-0002 • Ref: Design suggested by Dr. A. J. East, Celanese Corp • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL) Tolerance (mL) Case Qty
20011-100
100
±1.0
1
Graduation Intervals (mL) 0-3 in 0.2, 3-20 in 0.5
Part Number Capacity (mL)
Case Qty
535801-0000
20
1
Class B Cylinders with Single Metric Scale and Glass Stopper The 250 mL size may be used to determine unsaponified matter in soaps and soap products (ASTM D460), and anhydrous salt free soda soap and fatty matter in soaps containing synthetic detergents (ASTM D820). The 500 mL size may be used in settlement tests of emulsified asphalts (ASTM D244). • KIMAX® cylinder with durable white ceramic enamel scale • Letters “TC” on cylinder indicate to contain • The 10 and 25 mL sizes are comparatively short to provide increased stability • Standard Taper glass stopper is supplied • Heights given below do not include the stopper • Replacement stopper is 850100 • Designed from ASTM Specification E1272, Style II, Class B requirements • Ref: ASTM Methods D244, D1094 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Modified Dean Stark Distillation Receiver • KIMAX® distilling receiver with full length Standard Taper 24/40 joints and a siphon return arm • Ref: ASTM Method D95 • Sidearm bridge equalizes pressure • Designed from ASTM Specification E123, Style A • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
Case Qty
Tolerance (mL)
±0.05 (1st set of subdivisions), ±0.1 (2nd set of subdivisions)
22012-10
10
1
Part Number
Capacity (mL)
Tolerance (mL)
Case Qty
20039-50 20039-100 20039-250 20039-500 20039-1000 20039-2000
50
±0.4 ±0.6 ±1.4 ±2.6 ±5.0
24 24
100 250 500
8 6 4 2
Bidwell-Sterling Moisture Test Distillation Receiver Bidwell-Sterling designed for the determination of moisture in foods and organics.
1000 2000
±10.0
• •
Made to ASTM specifications E123
Also conforms to many methods of the American Oil Chemists Society
Hydrometer Cylinders with Pour Spout • KIMAX® plain, ungraduated cylinder with a hexagonal base flat ground for stability • Approximate wall thickness is 1.5 mm • Ref: ASTM Method D287, D1298 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 751350-0005 751351-0005
Capacity (mL) Subdivision (mL)
Case Qty
5 5
0.1
1 1
0.05
Part Number 20058-38200 20058-38375 20058-50375 20058-63460
Capacity (mL) Diameter (mm)
Case Qty
175 340 600
38 38 50 63
1 1 1 1
1200
Powered by FlippingBook