280 PETROCHEMICAL
Distillation / Flasks / Thermometers
General Distillation Apparatus KIMAX® apparatus used in general purpose distillation and phenol distillation.
Engler Distilling Flasks with Three Reference Lines For use with Haage automatic distillation apparatus or others that call for three thermometer depth insertions. • Sidearm tube is sealed at an angle of 75° from the neck and is 137 ± 3 mm from the bottom of the flask three reference lines • Ref: ASTM D86 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Flask has a flat bottom and a distillation head with a 19/38 joint
• •
Supplied with a Standard Taper stopper
Condenser is Graham-style, having a 200 mm jacket with a 19/38 joint at the top only
• For method, reference APHA Examination of Water and Wastewater: Method 4500-NH3 nitrogen (ammonia) in purified drinking water, natural water, and highly purified wastewaters (concentration < 20 μg/L) • Method calls for use with tall form 50 mL Nessler Tubes (45315A & B-50) • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
Arm OD (mm)
Case Qty
26016-125
125
7
24
Part Number
Capacity (mL)
Case Qty
21500-500 21500-1000
500
1 1
1000
Barrett Distilling Flasks •
Barrett flasks made to ASTM E133 specifications
• These flasks feature smooth, consistent, heavy walls for uniform heating and minimal breakage • Supplied with one cork for the sidearm • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Engler Distilling Flasks KIMAX® distilling flask.
Part Number 610910-0125 610900-0200
Capacity (mL)
Type
Case Qty
•
Sidearm tube is sealed at an angle of 75° from the neck and is 137 ± 3 mm from the bottom of the flask
125 200
Engler Barrett
12 24
• Designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802 • Ref: ASTM Method D86 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
Arm OD (mm)
Case Qty
Thermometer Centering Device Designed for 6.5 mm OD manual thermometer or 1/4” temperature sensor probe as used on standard Automated Distillation Apparatus with Kimble 26015-125 flasks.
26015-125
125
7
24
• • • •
Fits glassware designed for rubber stopper size 2 PTFE body with FKM o-ring seal assures proper centering of sensor probe in flask neck
Cap material is yellow polypropylene
Ref: ASTM Method D86
Part Number
Body OD (mm)
Case Qty
26015C-125
6.5
1
Powered by FlippingBook