284 PETROCHEMICAL
Flasks / Funnels / Oxidation
Single Standard Taper Neck Round Bottom Flask • Single neck flask with a Standard Taper outer joint • Ref: ASTM Method D95 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
1-1/2” Stem Powder Addition Funnels • KIMAX® funnel with a short, wide stem • Constructed with a heavy uniform wall and a strong, fire-polished rim and stem to provide a long service life • Funnel has a high resistance to chemical attack and mechanical and thermal shock • Designed from ASTM Specification E1095, Type IV requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 601000-0124 601000-0129 601000-0224 601000-0724
Capacity (mL)
Body OD (mm)
Case Qty
50 50
48 48 64
1 1 1 1
100
1000
130
Part Number 29020-60 29020-80 29020-100 29020-125 29020-150
ID at Funnel Top (mm)
Length of Stem (mm)
Case Qty
60 80
35 35 35 35 35
24 24 24 12 12
100 125 150
Short Stem Addition Funnels This KIMAX® funnel is constructed with heavy uniform walls, molded rims and fire-polished stems to give a long service life. • Funnels have a high resistance to chemical attack and mechanical and thermal shock • A piece of filter paper, when folded to form the filtering
Oxidation Cell Used in the measurement of inherent stability of middle distillate petroleum fuel under accelerated oxidizing conditions. • The cell consists of a test tube, a condenser and an oxygen delivery tube • Ref: ASTM D943 and D2274 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type 1 and ASTM E438, Type I, Class A requirements
cone, forms a precise 60° angle. If the funnel is also 60°, as are the vast majority, then the only effective filtering area is down near the tip • The exclusive KIMAX® 58° funnel promotes faster, more effective filtering because the cone is suspended by its uppermost edge, leaving most of the conical area for filtration • Designed from ASTM Specification E1095, Type I, Class A requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 28950-25 28950-35 28950-45 28950-55 28950-65 28950-75 28950-90 28950-100
ID at Funnel Top (mm)
Length of Stem (mm)
Case Qty
25 35 45 55 65 75 90
40 50 50 63 63 75 97 97
24 24 24 48 48 48 24 24
Part Number
Overall Height (mm)
OD (mm)
Case Qty
896600-0000
600
45
1
100
Petrochemical Distillation Apparatus for Water in Crude Oil This apparatus is used for the determination of water in crude oil by distillation. • Apparatus includes a 1000 mL round bottom flask with Standard Taper 24/40 joint, a distillation receiver with 0.05 graduations, a drying trap and a 400 mL Liebig condenser • Ref: ASTM D4006 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
KIMAX® Squibb Separatory Funnel with PTFE Stopcock • KIMAX® funnel is supplied with a Standard Taper ground glass stopper and a PTFE stopcock • Lower stems have an ID large enough that a column of liquid will “break” with the stopcock closed, thereby giving a more complete separation and eliminating the necessity of emptying the funnel • Designed from ASTM Specification E1096, Type IV requirements • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 513970-0000
Case Qty
1
Part Number 29048F-30 29048F-60 29048F-125 29048F-250 29048F-500 29048F-1000 29048F-2000
Capacity (mL)
Stopcock Bore Size (mm)
Case Qty
30 60
2 2 2 4 4 4 6
4 4 4 4 4 2 2
125 250 500
1000 2000
Powered by FlippingBook