287 PETROCHEMICAL
Tubes
8” Oil and Weathering (End Point Index) Centrifuge Tubes Can be used in the determination of residues in Liquified Petroleum (LP) gases, ASTM Method D2158.
6” Short Cone Oil Centrifuge Tubes KIMAX® tube designed for field use in testing petroleum.
• • •
Calibrated to contain
Scale and legend are durable white ceramic enamel 45243-200 is graduated in %. 100 mL equals 200%
• • •
KIMAX® tube used extensively in California
Calibrated to contain
• 45243LF-100 & 45243LF-200 features our proprietary Lazer-Fused™ technology for durable and precise marking and outstanding volumetric accuracy • Top is tooled to accept snap cap 28150R-6 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Capacity (mL) Graduation Intervals (mL) Case Qty 45243-100 100 0-0.5 in 0.05, 0.5-2 in 0.1, 2-3 in 0.2, 3-5 in 0.5, 5-10 in 1, 10-25 in 5, and at 50, 100 12 45243LF-100 100 same as 45243-100 12 45243-200 200 0-0.1% in 0.10%, 1-4 in 0.20, 4-6 in 0.40, 6-10 in 1, 10-20 in 2, 20-50 in 10, and at 100, 200
Different graduations than 45240
• 45241LF-100 features our proprietary Lazer-Fused™ technology for durable and precise marking and outstanding volumetric accuracy • Scale and legend are durable white ceramic enamel • Top is tooled to accept snap cap 28150R-6 • Ref: ASTM Method D2158 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Capacity (mL)
Case Qty
Graduation Intervals (mL)
6 6
0-1 in 0.05, 1-3 in 0.1, 3-6 in 0.2, 6-10 in 0.5, 10-100 in 1
45241-100
100
12
45243LF-200 200
same as 45243-200
45241LF-100 100
same as 45241-100
12
Soil Analysis Tube These tubes are designed for use with Teledyne Tekmar 2016/2032 Autosamplers and 4100/4200 Automatic Samplers that are equipped with 3/4” diameter mounts. • The larger opening of these disposable tubes permits easier sample loading and facilitates the weighing of solid and soil samples • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
8” Oil Centrifuge Tubes KIMAX® tube used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products (D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating oils (ASTM D91 and D128); and in testing for acidity of distillation residues or hydrocarbon liquids of gasoline or petroleum solvents (ASTM D1093).
• •
Calibrated to contain
Scale and legend are durable white ceramic enamel
• 45240LF-100 features our proprietary Lazer-Fused™ technology for durable and precise marking and outstanding volumetric accuracy • Top is tooled to accept snap cap 28150R-6 • Referenced in ASTM D4007, D91, D1796, D1093 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Capacity (mL) Graduation Intervals (mL)
Part Number 591175-0715
OD (mm)
Length (mm)
Case Qty
19
150
24
Cannon-Fenske Uncalibrated Serialized Viscometer Tubes Cannon-Fenske uncalibrated viscometer tube for use in obtaining kinematic viscosities of transparent liquids (ASTM Method of Test D445). • KIMAX® tube designed from ASTM Specification D446 • Permanently marked with an individual serial number • Viscosity ranges shown below are for an efflux time greater than 200 seconds • Lines and legend are printed black • Ref: ASTM Method D445 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements • Calibration against a standard liquid of known viscosity or against a second viscometer with a known constant must be made before use. Part Number Approximate Constant Kinematic Centistokes Size
Case Qty
0-0.5 in 0.05, 0.5-2 in 0.1, 2-3 in 0.2, 3-5 in 0.5, 5-10 in 1, 10-25 in 5, 25-100 in 25
45240-100
100
12
45240LF-100 100
same as 45240-100
12
California Centrifuge Tube with Red Stripe KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. • Tube has a permanent red stripe under the white enamel graduations for easy reading of results • Scale and legend are durable white ceramic enamel • Top is tooled to accept snap cap 28150R-6 • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Case Qty
46460-50 46460-100 46460-150 46460-200 46460-300 46460-350 46460-400
0.004 0.015 0.035
0.8 to 4 3 to 15 7 to 35
50 1 100 1 150 1 200 1 300 1 350 1 400 1
Part Number
Capacity (mL)
Case Qty
0.1
20 to 100 50 to 250
Graduation Intervals (mL)
0.25
0-0.5 in 0.05, 0.5-2 in 0.1, 2-3 in 0.2, 3-5 in 0.5, 5-10 in 1, 10-25 in 5, and at 50, 75, 100
0.5 1.2
100 to 500 240 to 1200
45239-100 100
12
Powered by FlippingBook