295 PURGE AND TRAP
5 mL Fritted Left Sparger This 5mL U-shaped fritted sparger is specially designed for use with Teledyne Tekmar® 2000 and 3000 Purge and Trap Concentrators when using either the AquaTek 50 or ALS 2050 Vial Autosamplers. • Fritted spargers are recommended for potable water and wastewater samples • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Soil Analysis Tubes These tubes are designed for use with Teledyne Tekmar® 2016/2032 Autosamplers and 4100/4200 Automatic Samplers that are equipped with 3/4” diameter mounts. • The larger opening of these disposable tubes permits easier sample loading and facilitates the weighing of solid and soil samples • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 591105-2605
Description
Case Qty
Part Number 591175-0715
OD (mm)
Length (mm)
Case Qty
5 mL Fritted Left Sparger
1
19
150
24
U-Shaped Spargers These U-shaped spargers are specially designed for use with Teledyne Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers. • Fritted spargers are recommended for potable water and wastewater samples • Fritless spargers are recommended for water, soils, polymers, pharmaceuticals and foods • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
U-Shaped Sparger for use with O-I Analytical Purge and Trap Sample Concentrators These U-shaped fritted spargers are designed for use with O-I Analytical Purge and Trap Sample Concentrators. Fritted spargers are recommended for potable water and wastewater samples. • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Capacity (mL) Neck OD (mm) Case Qty
Part Number
Case Qty
Description
591132-2605 591132-2625
5
209015 209031
1 1
25
591100-0005 5 mL Fritless Sparger (2000/3000) with 1/2” mount 1 591100-0025 25 mL Fritless Sparger (2000/3000) with 1/2” mount 1 591101-0025 25 mL Fritless Sparger (2000/3000) with 3/4” mount 1 591100-2605 5 mL Fritted Sparger (2000/3000) with 1/2” mount 1 591101-2605 5 mL Fritted Sparger (2000/3000) with 3/4” mount 1 591100-2625 25 mL Fritted Sparger (2000/3000) with 1/2” mount 1 591101-2625 25 mL Fritted Sparger (2000/3000) with 3/4” mount 1
Needle Spargers Needle spargers are recommended for purge and trap analysis of slurries, soils, viscous liquids and foaming liquid samples. • These spargers are also used for headspace sweep analysis of volatile compounds in oils • Designed for use with Teledyne Tekmar® 2000 and 3000 Purge and Trap Concentrators and 2016 and 2032 Autosamplers • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
U-Shaped Sparger for use with EPA Method 603 These U-shaped spargers are designed for use on the Teledyne Tekmar® 2000 and 3000 Purge and Trap Concentrators when doing EPA Method 603 and using either an AQUATek 50 or ALS 2050 Vial Autosampler. • The introduction stem is located on the foam trap, allowing a sample heater to be placed around the glassware as required by the EPA method • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements Part Number Description
Part Number 591150-0005
Description
Case Qty
5 mL Needle Sparger with 1/2” mount
1
Case Qty
5 mL U-Shaped Fritted Sparger for use with EPA Method 603 25 mL U-Shaped Fritted Sparger for use with EPA Method 603
591120-2605
1
591120-2625
1
Powered by FlippingBook