ROTARY EVAPORATORS
304
Flasks / Freeze Drying / Traps
Hose Adapters This adapter is intended for connection to vacuum hose and a 562830 vacuum adapter.
KimCote® Heavy Wall Round Bottom Boiling Flasks This KIMAX® KimCote® plastic-coated single neck flask is useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.
• • •
1/2” (12.7 mm) ID size will fit 3/4” (19.1 mm) ID hose 5/16” (7.9 mm) ID will accept 1/2” (12.7 mm) ID hose
Supplied with a size 018 FKM o-ring
•
With a Spherical joint
• Autoclavable KimCote® safety coating reduces the hazards of shattered glass and leakage of toxic or corrosive chemicals • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number 562850-0516 562850-0012
Fits Hose ID (in)
Tube ID (in)
Case Qty
0.3125
0.5
1 1
0.5
0.75
Spherical Joint Size (mm)
Part Number
Capacity (mL)
Case Qty
Vacuum Adapters Polyethylene vacuum adapter for 562800 freeze dry flasks allows connection to a vacuum system with either 1/2” (12.7 mm) or 3/4” (19.1 mm) ID hose.
KC25330-100 KC25330-250 KC25330-500 KC25330-1000 KC25330-2000
100 250 500
35/20 35/25 35/25 35/25 35/25
1 1 1 1 1
1000 2000
•
This unit employs the same double FKM o-ring seal and special PTFE screen found in 562810, but does not include the 562850 hose adapters
Part Number 562830-0000
Case Qty
Freeze Drying Flasks This flask may be used with rotary evaporators or removable vacuum hose by selecting the appropriate adapter.
1
•
Thick wall borosilicate glass flask has an extra wide opening for easy access to the sample
• Base is formed so that the unit is free standing, requiring no special support • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Bottom Vapor Tube Trap This trap is designed for use between flask and rotary evaporator to reduce carry-over from foaming or bumping.
Overall Height x OD (mm)
•
No drain holes assure that dry residue does not get re-wetted The modified joint on the 570260 series features a square bead for better sealing to rotary evaporator equipment
Part Number
Capacity (mL)
Case Qty
•
562800-0250 562800-0500 562800-1000 562800-2000
250 500
105 x 75 175 x 75 200 x 100 280 x 120
1 1 1 1
1000 2000
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Capacity (mL)
Standard Taper Joints: Top (Outer), Bottom (Inner)
Part Number
Case Qty
Freeze Drying Adapters Adapts 562800 freeze dry flasks to rotary evaporators for concentration or removal of solvent from single or multiple samples.
570260-0114 570260-0124 570260-2514 570260-2524 570260-5024 570200-0114 570200-0119 570200-0124 570200-2514 570200-2519 570200-2524 570200-5014 570200-5024
100 100 250 250 500 100 100 100 250 250 250 500 500
24/40, 14/20
1 1 1 1 1 1 1 1 1 1 1 1 1
24/40
24/40, 14/20
24/40 24/40
•
Polyethylene unit with a 24/40 outer joint and a vacuum release A vacuum-tight seal is assured through the use of double FKM o-rings
24/40, 14/20 24/40, 19/22 24/40, 24/40 24/40, 14/20 24/40, 19/22 24/40, 24/40 24/40, 14/20 24/40, 24/40
•
• A special PTFE screen is provided to prevent loss of material Part Number Standard Taper Joints
Case Qty
562810-2440
24/40
1
Powered by FlippingBook