ROTARY EVAPORATORS
306
Vial Adapter Systems
Clamps Used to secure Standard Taper joints, this positive closure clamp is made of tough, color-coded plastic.
Vial Connecting Adapters This adapter allows the connection of standard rotary evaporator traps to vials with 13-425 or 20-400 GPI threads.
•
Clamp will not scratch glass and can be autoclaved to 200 °C Good chemical resistance at a lower cost than metal clips
•
Standard Taper outer ground joint to GPI thread
• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
•
Standard Taper Joints
Part Number
Description
Case Qty
Part Number
GPI Finish
Case Qty
Size 10 Polyacetyl, Standard Taper Clamp, Aqua, Fits joint sizes 10/30,10/18 Size 14 Polyacetyl, Standard Taper Clamp, Yellow, Fits joint sizes 14/20, 14/35 Size 19 Polyacetyl, Standard Taper Clamp, Blue, Fits joint sizes 19/22, 19/38 Size 24 Polyacetyl, Standard Taper Clamp, Green, Fits joint sizes 24/40, 24/25 Size 29 Polyacetyl, Standard Taper Clamp, Red, fits joint sizes 29/42, 29/26 Size 34 Polyacetyl, Standard Taper Clamp, Orange, Fits joint sizes 34/45, 34/28 Size 40 Polyacetyl, Standard Taper Clamp, Gold, Fits joint sizes 40/50, 40/35 Size 45 Polyacetyl, Standard Taper Clamp, Brown, Fits joint sizes 45/50
675300-0010
12
747130-1314 747130-1319 747130-1324 747130-2014 747130-2019 747130-2024
14/20 19/22 24/40 14/20 19/22 24/40
13-425 13-425 13-425 20-400 20-400 20-400
1 1 1 1 1 1
675300-0014
12
675300-0019
12
675300-0024
12
675300-0029
12
675300-0034
12
Vial Adapter System Receivers This vial is a standard receiver for a vial adapter system.
675300-0040
12
675300-0045
12
• •
Screw threads
Graduated to ensure more accurate measurements and dispensing
• Assembled open top closure and PTFE-faced silicone septum • ACCUFORM® V-shaped interior for minute sample recovery using a syringe needle • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
OD (mm); GPI Finish 14; 13-425 21; 20-400 21; 20-400 21; 20-400 25; 24-400
Connector Kit Connector kit with ten connectors, one each of the following sizes: 8-425 to 8-425, 8-425 to 13-425, 13-425 to 13-425, 13-425 to 15-425, 13-425 to 20,400, 15-425 to 20,400, 18-400 to 20-400, 20-400 to 20-400, 20-400 to 22-400, 20-400 to 24-400
Part Number Capacity (mL)
Case Qty
60700-1 60700-2 60700-3 60700-5 60700-10
1 2 3 5
12 12 12 12 12
10
• • • •
For use to 200 °C
Connectors have PTFE seals and FKM o-rings
Blue glass-filled nylon
24-400 cap is black polypropylene
Glass-filled Nylon Connectors with PTFE Seals Use these connectors to connect standard rotary evaporator traps to vials with 13-425 or 20-400 GPI threads.
Part Number 747205-0000
Case Qty
10
•
Open top compression cap and connectors are glass-filled nylon for use to 200 ºC
• The necessary components are listed below and must be ordered separately
Part Number 747205-1313 747205-1315 747205-1320 747205-1520 747205-1820 747205-2020 747205-2022 747205-2024
Modified GPI Thread
Case Qty
13-425 to 13-425 13-425 to 15-425 13-425 to 20-400 15-425 to 20-400 18-400 to 20-400 20-400 to 20-400 20-400 to 22-400 20-400 to 24-400
1 1 1 1 1 1 1 1
Powered by FlippingBook