SAFETY
316
Tissue Grinders / ULTRA-WARE®
Biomasher II® Closed System Disposable Tissue Homogenizers
ULTRA-WARE® Economy Three-Hole Cap Systems • The cap body is manufactured from PTFE and is supplied with a TFE/ propylene o-ring and a polypropylene screw collar • The connecting threads on the top of the cap use standard ¼”-28 flangeless fittings • Two of the ports have 1/8” through-holes; the third port has a 1/16” through-hole • Assembly instructions included. • ULTRA-WARE® flat bottom reservoirs have a plastic safety coating which blocks virtually all UV light up to 385 nm, preventing photodegradation of light-sensitive mobile phases • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Closed system tissue homogenizer (tube with pestle) ideal for homogenizing of animal tissues and organs as well as plant materials, insects, DNA, RNA, proteins, yeasts and enzymes.
•
Micro-sized version of our CS1 and CS2 disposable, closed system tissue homogenizers Pestle with a molded-in shaft guard to minimize potential exposure to hazardous materials Abrasive surfaces on the pestle tip and inner tube area ensure efficient grinding of samples
•
•
•
Available both sterile and non-sterile
• The tube is clear polypropylene and the pestle is polyacetal • 749625-0010 is packaged in a bulk pack configuration • 749625-0020 and 749625-0030 are individually wrapped Part Number
Part Number 953930-1002 953930-2002 953930-5002 953930-1003
Reservoir Capacity (mL)
Case Qty
1000 2000 5000
1 1 1 1
Capacity (mL) Sterile/Non-sterile Case Qty
749625-0010 749625-0020 749625-0030
1.5 1.5 1.5
Non-sterile Non-sterile
50 50 50
10000
Sterile
Replacement Parts
DUALL® Tissue Grinders with Glass Pestles and KimCote® Glass Tubes • Similar to 885450 series but with plastic safety coating • KimCote® plastic coating on tube will contain the homogenate if the tube breaks or cracks during motor-driven homogenization • The coating is transparent, allowing an unobstructed view of the homogenate • Replacement components are available and completely interchangeable • Clearance between pestles and tubes is 0.004” to 0.006” • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Part Number
Description
Case Qty
Economy Three-Hole Cap - includes PTFE body, GL45 open top screw collar, and a size 216 TFE/propylene o-ring PTFE Body for Economy Three-Hole Cap PTFE Body for Economy Three-Hole Cap 2 µm All PEEK Inlet/Sparge Filter, OD 1.1”, Length 0.8”, Fits Tubing OD 1/8” ETFE Flangeless Nut for 1/8” OD Tubing, 1/4”-28 Thread, Use with the 420822-Series Flangeless Ferrules ETFE Flangeless Ferrule for 1/8” OD Tubing, for Use with 420821 Series Male Nuts ETFE Nut Plug 1/4”-28, Used to Seal Ports with Flat Bottom 1/4”-28 Threads
953913-5000
1
953913-5001 953913-5001
1 1
953916-3002
1
420821-0018
1
420822-0018
1
953913-0001
1
Size; Working Capacity (mL)
Pestle Shaft OD (mm)
Part Number
Case Qty
420823-0018 1/8” OD x 0.063” ID x 10’ FEP / PTFE Tubing
1
250 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 133 mm, Overall Diameter 73 mm 500 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 165 mm, Overall Diameter 89 mm 1000 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 205 mm, Overall Diamter 111 mm 2000 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 250 mm, Overall Diameter 138 mm 5000 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 320 mm, Overall Diameter 186 mm 10000 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 400 mm, Overall Diameter 234 mm 20000 mL Flat Bottom HPLC Reservoir without Graduations, Overall Height 490 mm, Overall Diameter 300 mm
885460-0020 885460-0021 885460-0022 885460-0023 885460-0024 885460-0025
20; 1 21; 3 22; 5
6 6 8
1 1 1 1 1 1
953902-0252
1
23; 15 24; 30 24; 50
10 10 16
953902-0502
1
953902-1002
1
Replacement Parts
953902-2002
1
Part Number
Case Qty
Description
953902-5002
1
885451-0021 885451-0022 885451-0023 885451-0024 885451-0025
Size 21 Pestle for DUALL® Tissue Grinder Size 22 Pestle for DUALL® Tissue Grinder Size 23 Pestle for DUALL® Tissue Grinder Size 24 Pestle for DUALL® Tissue Grinder Size 25 Pestle for DUALL® Tissue Grinder Size 20 Plastic-Coated Tube for DUALL® Tissue Grinder Size 21 Plastic-Coated Tube for DUALL® Tissue Grinder Size 22 Plastic-Coated Tube for DUALL® Tissue Grinder Size 23 Plastic-Coated Tube for DUALL® Tissue Grinder Size 24 Plastic-Coated Tube for DUALL® Tissue Grinder Size 25 Plastic-Coated Tube for DUALL® Tissue Grinder
1 1 1 1 1
953902-1003
1
953902-2003
1
885462-0020
1
885462-0021
1
Fittings Kit • Accessories
885462-0022
1
885462-0023
1
Kit consists of 20’ of 1/8” OD FEP PTFE tubing, 20 CTFE ferrules and 20 (1/4”-28) ETFE nuts Part Number Case Qty 953882-0000 1
885462-0024
1
885462-0025
1
Powered by FlippingBook