318 SAFETY
ULTRA-WARE® Storage
Conical Bottom Reservoirs without Graduations Designed for preparation, storage and delivery of all liquid chromatography mobile phases. As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. Plastic safety-coating blocks UV light up to 385nm, preventing photo-degradation of light-sensitive reagents • Safety coating helps to retain glass fragments and allows a reasonable amount of time for the safe disposal of liquid contents • Used with internal pressures up to 0.4 bar (6 psig) for helium sparging and blanketing of the mobile phase • Operating Pressure: -1.0 to 0.4 bar (-14.5 psig to 6 psig) • Conical bottom delivers all of the mobile phase without reservoir tilting • Chemically inert glass prevents leaching of any extractables into the mobile phase solvents • Supplied with GL-45 screw thread • • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Conical Bottom Reservoirs with Side Necks and Graduations Designed for preparation, storage and delivery of all liquid chromatography mobile phases. As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. • Plastic safety-coating blocks UV light up to 385nm, preventing photo-degradation of light-sensitive reagents • Safety coating helps to retain glass fragments and allows a reasonable amount of time for the safe disposal of liquid contents • Used with internal pressures up to 0.4 bar (6 psig) for helium sparging and blanketing of the mobile phase • Operating Pressure: -1.0 to 0.4 bar (-14.5 psig to 6 psig) • Conical bottom delivers all of the mobile phase without reservoir tilting • Side neck allows addition of filtered solvent without removing delivery cap • Chemically inert glass prevents leaching of any extractables into the mobile phase solvents • Supplied with GL-45 screw thread • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
953901-0252 953901-0502 953901-1002 953901-2002 953901-5002 953901-1003 953901-2003
250 500
203 x 85 230 x 105 275 x 130 319 x 150 373 x 205 433 x 255 578 x 315
1 1 1 1 1 1 1
Overall Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
1000 2000 5000
953910-1003 953910-2002 953910-2003 953910-5002
10000
433 x 255 319 x 150 578 x 315 373 x 205
1 1 1 1
2000
10000 20000
20000
5000
Flat Bottom Reservoirs without Graduations Designed for preparation, storage and delivery of all liquid chromatography mobile phases. As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents.
Conical Bottom Reservoirs with Graduations Designed for preparation, storage and delivery of all liquid chromatography mobile phases. As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. • Plastic safety-coating blocks UV light up to 385nm, preventing photo-degradation of light-sensitive reagents • Safety coating helps to retain glass fragments and allows a reasonable amount of time for the safe disposal of liquid contents • Used with internal pressures up to 0.4 bar (6 psig) for helium sparging and blanketing of the mobile phase • Operating Pressure: -1.0 to 0.4 bar (-14.5 psig to 6 psig) • Conical bottom delivers all of the mobile phase without reservoir tilting • Chemically inert glass prevents leaching of any extractables into the mobile phase solvents • Supplied with GL-45 screw thread • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
• Plastic safety-coating blocks UV light up to 385nm, preventing photo- degradation of light-sensitive reagents • Safety coating helps to retain glass fragments and allows a reasonable amount of time for the safe disposal of liquid contents • Used with internal pressures up to 0.4 bar (6 psig) for helium sparging and blanketing of the mobile phase • Operating Pressure: -1.0 to 0.4 bar (-14.5 psig to 6 psig) • Chemically inert glass prevents leaching of any extractables into the mobile phase solvents • Supplied with GL-45 screw thread • Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Overall Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
953902-0252 953902-0502 953902-1002 953902-2002 953902-5002 953902-1003 953902-2003
250 500
133 x 73 165 x 89 205 x 111 250 x 138 320 x 186 400 x 234 490 x 300
1 1 1 1 1 1 1
Overall Height x Diameter (mm)
Part Number
Capacity (mL)
Case Qty
1000 2000 5000
953922-0252 953922-0502 953922-2002 953922-5002 953922-1003 953922-2003
250 500
203 x 85 230 x 105 319 x 150 373 x 205 433 x 255 578 x 315
1 1 1 1 1 1
10000 20000
2000 5000
10000 20000
Powered by FlippingBook